RY34442 Ryobi Trimmer - Overview

Sections of the RY34442

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Decal-Warning – Part Number: 984032001
Decal-Warning
PartSelect #: PS10037360
Manufacturer #: 984032001
$5.95
  Special Order
Hex Nut – Part Number: 678029002
Hex Nut
PartSelect #: PS12654681
Manufacturer #: 678029002
Hex nut m6.3 x 1 black oxide
$5.95
  Special Order
ELECTRICAL LEAD WIRE ASSEMBLY – Part Number: 308863022
ELECTRICAL LEAD WIRE ASSEMBLY
PartSelect #: PS18784007
Manufacturer #: 308863022
$5.95
  Special Order
SCREW – Part Number: 660925003
SCREW
PartSelect #: PS18788125
Manufacturer #: 660925003
(M4 x 12 mm)
$5.95
  Special Order
MUFFLER ASSEMBLY – Part Number: 309320002
MUFFLER ASSEMBLY
PartSelect #: PS18784047
Manufacturer #: 309320002
$9.95
  Special Order
SCREW (M4 X 27MM) – Part Number: 660780002
SCREW (M4 X 27MM)
PartSelect #: PS18788092
Manufacturer #: 660780002
$5.95
  Special Order
SCREW (M4 X 12 MM) – Part Number: 660466002
SCREW (M4 X 12 MM)
PartSelect #: PS18788019
Manufacturer #: 660466002
$5.95
  Special Order
O-RING – Part Number: 570400001
O-RING
PartSelect #: PS18786887
Manufacturer #: 570400001
$5.95
  Special Order
SPARK PLUG – Part Number: 870301002
SPARK PLUG
PartSelect #: PS18789582
Manufacturer #: 870301002
$7.95
  Special Order
Spring – Part Number: 638033001
Spring
PartSelect #: PS16389744
Manufacturer #: 638033001
$5.95
  Special Order
Edger Wing Nut – Part Number: PS02453
Edger Wing Nut
PartSelect #: PS10049934
Manufacturer #: PS02453
This is a genuine Homelite replacement part. The wing nut (1/4-20) is made of high quality metal, and is designed for use in many string trimmers. This item assists in securing the handle to the upper...
$5.95
  Special Order
Trimmer Starter Rope – Part Number: 900849002
Trimmer Starter Rope
PartSelect #: PS10022169
Manufacturer #: 900849002
This is a genuine OEM sourced replacement starter rope, not an aftermarket equivalent. This part is used to pull start Homelite and Ryobi handheld lawn and garden equipment. This rope is made from dur...
$5.95
  Special Order

Questions And Answers for RY34442

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Parts Used:
Carburetor Assembly
  • MIKE from LOXAHATCHEE, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper shaft was bent
Watch a video, great instructions:
Parts Used:
Upper Boom Assy.
  • Nathan from Fayetteville, AR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The new boom had to be modified where it would work.
Once I was able to see the problem. I had to make modifications so it could be used. It took awhile to figure out the problems. With a drill motor and metal bit I was able to get the boom where I could use it.
Parts Used:
Upper Boom Assy.
  • TFRANKLIN from MICANOPY, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!