RY34425 Ryobi Trimmer - Overview
Sections of the RY34425
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Trimmer Screw (M6 X 20 Mm)
PartSelect #: PS9989492
Manufacturer #: 660697002
It is a genuine replacement part that is supplied directly from the original equipment manufacturer for use with Homelite and Ryobi handheld trimmers and brushcutters. This is the main screw used to s...
$5.95
Special Order
Screw (m4 X 19 Mm)
PartSelect #: PS9989642
Manufacturer #: 660968001
This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Homelite and Ryobi handheld lawn and garden equipment. It is a standard hardware which has multiple ap...
$5.95
Special Order
ELECTRICAL LEAD WIRE ASSEMBLY
PartSelect #: PS18784007
Manufacturer #: 308863022
$5.95
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Parts Used:
-
MIKE from LOXAHATCHEE, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper shaft was bent
-
Nathan from Fayetteville, AR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The new boom had to be modified where it would work.
Once I was able to see the problem. I had to make modifications so it could be used. It took awhile to figure out the problems. With a drill motor and metal bit I was able to get the boom where I could use it.
Parts Used:
-
TFRANKLIN from MICANOPY, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!