RY34006 Ryobi Trimmer - Overview
Sections of the RY34006
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Trimmer Screw (M6 X 20 Mm)
PartSelect #: PS9989492
Manufacturer #: 660697002
It is a genuine replacement part that is supplied directly from the original equipment manufacturer for use with Homelite and Ryobi handheld trimmers and brushcutters. This is the main screw used to s...
$5.95
Special Order
Screw (m4 X 19 Mm)
PartSelect #: PS9989642
Manufacturer #: 660968001
This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Homelite and Ryobi handheld lawn and garden equipment. It is a standard hardware which has multiple ap...
$5.95
Special Order
Edger Wing Nut
PartSelect #: PS10049934
Manufacturer #: PS02453
This is a genuine Homelite replacement part. The wing nut (1/4-20) is made of high quality metal, and is designed for use in many string trimmers. This item assists in securing the handle to the upper...
$5.95
Special Order
Fuel Filter
PartSelect #: PS9936640
Manufacturer #: 300759005
This is a genuine OEM replacement part, it is made out of Metal with Fabric Filter Material. It is sold individually and is used on a variety of Lawn and Garden Equipment. This is an in-tank fuel filt...
$7.95
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Choke lever snapped off.
Remove air cleaner cover and filter, remove air box base (2 bolts). Simply reverse order to reinstall. Side notes: 1) The air box itself comes complete with a new filter, so no need to order that separately unless you want some spares. They're only $0.86 each anyway, so you might as well while you're at it. 2) Part was perfect in fit and function. 3) The prices here are so ridiculously low, I don't know how they make any money. I'll most definitely be back!
Parts Used:
-
Craig from NORTH PORT, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Parts Used:
-
MIKE from LOXAHATCHEE, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper shaft was bent
-
Nathan from Fayetteville, AR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!