Effortlessly improve the performance of your Ryobi units with the Throttle Cable and Wire Assembly. Designed with precision and quality in mind, this authentic part ensures lasting durability and peak...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
April 19, 2024
The dangles loose from the shaft and doesn't spin when unit is running.
I have tried to push it back up the shaft but it falls right back loose.
I will appreciate your advice as to what is wrong and what if any parts I may
need to repair it.
Thanks.
For model number RY252CSVNM
Hi James, thank you for reaching out. We would suggest checking the throttle cable first. If it is fine, the issue could be with the trimmer head assembly, part number PS16668988. You may need to replace it to fix the issue. We hope this solves your problem!
Pulled trimmer apart, found plastic shims on coil broken. This allowed the coil to drop onto the flywheel, which stopped the crank and in turn sheared the flywheel key. If the key shears it will throw the timing off and the engine will not start. The key is made into the flywheel so it had to be replaced. The trimmer runs again.
It didn't, After 2 new sparkplugs 2 coils iand a fly wheel and coil set using a business card. And is killed switch disconnected? Still no spark and I don't have the clue and I'm amechanic.
