RY15524 Ryobi Trimmer - Overview

This is a genuine OEM replacement part, it is sold individually. This spring is used in a number of String Trimmers and Brush Cutters. This Spring is part of the String advancing system. It is placed in between the spool and the spool housing. Over time the spring will lose its tension and will have to be replaced.

Genuine OEM replacement part used on some models of Gas String Trimmers. This part is made out of Plastic with included Metal Eyelet. This part holds and secures the Spool. Please note: Spool, Spring and the Spool Retainer are all Sold Separately.

This is a Genuine OEM sourced replacement part designed for use with Ryobi String Trimmers and Brushcutters. This item is made out of Metal and it is Sold Individually. It is the Lower Shaft that the Cutting Head is attached to. • The attachment connects to the power head by means of a coupler device. • Loosen the knob on the coupler...Read more of the power head shaft and remove the end cap from the attachment. • Push in the button located on the attachment shaft. • Align the button with the guide recess on the power head coupler and slide the two shafts together. • Rotate the attachment shaft until the button locks into the positioning hole. NOTE: If the button does not release completely in the positioning hole, the shafts are not locked into place. Slightly rotate from side to side until the button is locked into place. • Tighten the knob securely.

Genuine OEM replacement part, this item is sold individually. This guard is used on the trimmer models shown below. The purpose of this part is to keep debris from being thrown by the cutting line and being stopped by the Guard The Guard includes the line cutting blade, to keep the line at the correct length.

Genuine OEM replacement part, this item is sold individually. This is the part of the trimmers listed below that the cutting line is installed in. This spool uses .095 diameter cutting line. If you would like to obtain the complete cutting head assembly with the line already installed, order part number 309562002

Genuine Ryobi replacement part, this assembly is sold individually. This is the part of the trimmers shown below that contains the cutting line,string head housing,spring and spool with the cutting line already installed in the spool. It is secured to the trimmer by using the 308042003 Spool Retainer (Red-LH Thread) which is threaded into the shaft. This is a dual line cutting head.

This item is a genuine OEM sourced replacement part that is intended to be used with strimmers from Ryobi and Homelite. The metal fasteners are used to secure the cutting head guard to the lower portion of the lower boom assembly. This item may require a hex socket wrench to install.

This is an OEM replacement part. It has a right hand thread screw to remove and attach it to the trimmer head. Its purpose is to hold the spool with the cutting line, in the spool housing. It also acts as the bumper to advance the line from the spool. This is a well used and abused part of the trimmer. It may be a good idea to order an extra one.