RY-SST44 Ryobi Trimmer - Overview
Sections of the RY-SST44
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Spool Retainer (Red-LH Thread)
PartSelect #: PS9937840
Manufacturer #: 308042003
This is an OEM replacement part. It has a left hand threaded screw to remove and attach it to the trimmer head. Its purpose is to hold the spool with the cutting line, in the spool housing. It also ...
$5.95
Special Order
Wing Nut
PartSelect #: PS12652964
Manufacturer #: 660886001
This replacement wing screw is a genuine OEM sourced item, it is not an aftermarket imitation. It is specially designed for Homelite and Ryobi string trimmers and brush cutters. This hardware is gener...
$5.95
Special Order
Gear Head
PartSelect #: PS12643974
Manufacturer #: 308210009
This Gear gear head assembly is designed to transfer power from the drive shaft to the cutting head, allowing the string trimmer or brush cutter to operate smoothly and efficiently. Housed in a durabl...
$36.95
Special Order
STRAIGHT SHAFT ASSEMBLY
PartSelect #: PS18783685
Manufacturer #: 308035047
Strange noise, strong shaking, or a cutting head that stops turning can point to a worn shaft assembly. The outer tube supports and protects the inner drive cable. Together, they carry power from the ...
$28.95
Special Order
SPACER
PartSelect #: PS18785305
Manufacturer #: 518367001
This authentic OEM sourced part is specially made for use with Ryobi and Homelite handheld lawn and garden equipment. It is an identical replacement for a missing or a faulty spacer that was installed...
$5.95
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replaced straight shaft, and the gear head.
Removed the 2 bolts holding the gear head to shaft. On my model I had to remove the complete trimmer head, then using 2 wrench take the trimmer head adapter off the gear heD. One video showed simply putting a screwdriver in the notch behind trimmer head and unscrewing complete head. Mine of course was slightly more involved but still quite easy once I saw what needed to be done.
Parts Used:
-
Tim from HOLLISTER, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!