RVM1325WW004 Hotpoint Microwave - Overview

Diagrams for RVM1325WW004

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W 130V – Part Number: WB36X10003
$27.89
Special Order
Light Bulb - 40W 130V
★★★★★
★★★★★
(4)
Part #WB36X10003
This 40-watt microwave light bulb is a genuine replacement component designed to provide interior illumination for compatible GE microwave models. Engineered to withstand the high temperatures within the microwave cavity, it allows users to monitor food during cooking without opening the door, preserving heat and cooking efficiency. The bulb’s compact design ensures a secure fit and consistent lighting performance. Replacement is typically straightforward and involves accessing the light housing inside the microwave. Always disconnect power before installation to ensure safety.
Microwave Fuse – Part Number: WB27X10928
$25.31
Special Order
Microwave Fuse
★★★★★
★★★★★
(1)
Part #WB27X10928
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse is at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair. NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
Light Socket - 250V 75W – Part Number: WB08X10016
$35.95
Special Order
Light Socket - 250V 75W
★★★★★
★★★★★
(2)
Part #WB08X10016
Light bulb not included.
Aluminum Grease Filter – Part Number: WB6X486
No Longer Available
Aluminum Grease Filter
Part #WB6X486
This aluminum filter collects grease particles in the air from cooking. Sold individually.
Glass Light Lens – Part Number: WB36X10071
$28.20
Special Order
Lock Button – Part Number: WB06X10126
$8.25
Special Order
Lock Button
Part #WB06X10126
Rectangle Glass Tray – Part Number: WB48X194
No Longer Available
Rectangle Glass Tray
Part #WB48X194
Diode – Part Number: WB27X10597
$72.08
Special Order
Diode
Part #WB27X10597
This part allows power to go one way only.
Capacitor – Part Number: WB27X10011
$138.14
Special Order
Capacitor
Part #WB27X10011
The capacitor is an electric circuit element that is used to store charge temporarily.
Magnetron – Part Number: WB27X10017
$236.27
Special Order
Magnetron
Part #WB27X10017
This magnetron uses electrical and magnetic currents in order to create an intense heat output.
BRACKET-BOTTOM LAMP – Part Number: WB06X10117
No Longer Available
BRACKET-BOTTOM LAMP
Part #WB06X10117

Common Symptoms of the RVM1325WW004

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave completely stopped working
968 of 1266 people found this instruction helpful.
  • Kim from Cliffside Park, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic rowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Was this helpful?
Thank you for voting!
Light bulb out, tried to remove, lamp socket broke
222 of 270 people found this instruction helpful.
  • Gene from Urbana, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Above the stove mounted microwave. I dropped the lens cover from under the bulb and tried to remove the bulb. The bulb separated from the base. I tried to remove the base with a pliers and the lamp socket broke. I ordered the parts and dropped the bottom cover of the unit down (5 screws). Removed 1 screww from the lamp socket, unplugged t he wires and took it out. Simply replaced socket, fastened bottom cover of microwave, installed new bulb and closed lens cover.
Was this helpful?
Thank you for voting!
bulb had broken off in base that was still screwed into socket
93 of 109 people found this instruction helpful.
  • william from san antonio, TX
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers, Screw drivers
At first I tried to use pliers to unscrew the base,very uncomfortable working position,upside down and backwards(the microwave is installed over the range top)very limited space for your body and arms to manuver and you really cant see the base,all of this took place after the breaker was turned off ofcourse,finally figured out that you c an drop the entire bottom housing of the microwave by unscrewing 6 screws and the light sockets are easily accessable once you lower it,take out 1 retaining screw ,remove the entire socket and unscrewed the broken base and replaced the bulbs,I said bulbs,there is no sense in having to replace another bulb in who knows how long since only one had burned out but they were both the same age
Was this helpful?
Thank you for voting!