RUD3000DB2 Roper Dishwasher - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Dishwasher Door Gasket - Gray – Part Number: WPW10509257
$82.29
In Stock
Dishwasher Door Gasket - Gray
★★★★★
★★★★★
(31)
Part #WPW10509257
If your dishwasher is leaking during use you may need to replace the gasket. The door gasket wraps around the sides and top of the dishwasher door and provides a waterproof seal between the tub and the door. It is gray in color and made of rubber. Once you have installed the door gasket it is recommend to close the dishwasher door and leave it closed for a few hours to make sure the door gasket properly seals. This is a genuine OEM part.
Dishwasher Detergent Lid Spring – Part Number: WP8066018
$12.05
In Stock
Dishwasher Detergent Lid Spring
★★★★★
★★★★★
(17)
Part #WP8066018
This metallic spring is for your dishwasher's soap cup cover. Sold individually.
Water Inlet Valve – Part Number: W10844024
$76.05
In Stock
Water Inlet Valve
★★★★★
★★★★★
(15)
Part #W10844024
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. NOTE: As per the manufacture this part has been updated from the original part. It may be a different color, and you may need to order an elbow (# W10685193) for the new designed valve to work.
Rinse Aid Cap – Part Number: WP3378134
$15.35
In Stock
Rinse Aid Cap
★★★★★
★★★★★
(15)
Part #WP3378134
This cap does not require the use of a o-ring seal.
Rubber Washer – Part Number: WP717273
$9.85
In Stock
Rubber Washer
Part #WP717273
Sold individually. Used with the heating element.
Range Torx Screw – Part Number: WP3368921
$10.95
In Stock
Range Torx Screw
★★★★★
★★★★★
(3)
Part #WP3368921
7-18 x 3/4-Inch - sold individually.
Dishwasher Lid Hinge Pin – Part Number: WP3372028
$17.55
In Stock
Dishwasher Lid Hinge Pin
Part #WP3372028
The lid hinge pin or detergent lid pin on your dishwasher helps dispense your dish detergent when your dishwasher is running. The pin fits with the dispenser lid and allows the lid to pop open and dispense detergent. It is a small, plastic pin that is approximately 3 inches in length. Due to its small size, the pin can be damaged relatively easily, and if your pin is broken or missing, it will need to be replaced. This product is sold individually.
Dishwasher Soap Dispenser Cover – Part Number: WP3378138
$34.05
In Stock
Dishwasher Soap Dispenser Cover
★★★★★
★★★★★
(2)
Part #WP3378138
This part covers your soap dispenser and is spring loaded.
Soap Cup Latch Kit – Part Number: 676413
$15.98
In Stock
Soap Cup Latch Kit
★★★★★
★★★★★
(8)
Part #676413
This latch kit is for the soap cup door of your dishwasher.
Washer Hose Clamp – Part Number: WP596669
$11.52
In Stock
Washer Hose Clamp
Part #WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Screw - 8-18 x 1/2 – Part Number: WP302868
$10.41
In Stock
Screw - 8-18 x 1/2
Part #WP302868
Sold Individually.

Manuals & Care Guides for RUD3000DB2

Click to download

Common Symptoms of the RUD3000DB2

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher leaking at bottom of door
249 of 270 people found this instruction helpful.
  • Eileen from Salt Lake City, UT
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
Installed new door seal. Dishwasher still leaked. Googled the model number and then cleaned the filter at the bottom of the dishwasher, still leaked.
Verified that manifold bearing was not work. It was OK.
Found note that a plugged vent might cause leaking door. Very counterintuitive. Pried off air vent cover. Vent was tho uroughly plugged with calcium deposts from steam. Cleaned these out.
Dishwasher no longer leaks.
Was this helpful?
Thank you for voting!
leaking water
95 of 107 people found this instruction helpful.
  • mary from Fountain Green, UT
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
The first thing I did was to investigate. I needed to find where the leak was coming from. It was leaking from just above tne door front panel, directly underneath the control panel buttons. I opened the dishwasher door, and decided to remove the door screen vent. I was covered with some offwhite fiberous, or filter like material. I thou ght perhaps the filter had broken down, and I ordered a new screen. When it arrived, and, although I had expected to receive a new filter with the plastic door screen, I didn't. There wasn't one to be ordered. I looked at the screen again. My problem was, that although I had considered that the substance I had thought was a filter, was instead build up of detergent, and other particals. That idea didn't seem to make sense. I didn't think it was possible for that stuff to get to the door screen. I thought, it was too far away from the dispenser and food particles. As it turned out, the buildup was, in fact, the problem. I properly cleaned the door vent, which was then fine, and I put it back into the door. There were no more leaks, that was it, and the problem was solved. As a last note however, unfortunatley, I have to return the new door vent screen that I ordered. I enjoyed solving the problem, and you all helped alot. Let's do it again sometime.
Was this helpful?
Thank you for voting!
Water was dripping out of the front of the unit down low.
83 of 91 people found this instruction helpful.
  • Phil from atascadero, CA
  • Really Easy
  • Less than 15 mins
I removed the old gasket, installed the new one which took about 20 seconds.Tested the unit, water was still dripping, but in a different fashion.As per a previous poster's instructions I removed the vent cover. (Located inside the dishwasher up high.)I cleaned out the calcium deposits with hot water and a sacraficial toothbrush. "Ta-Da!" Everything is now groovy!Thank you so very much for your excellent service. Your site was easy to use and your shipping was "lightning fast!" Also, the advice you sent me was invaluable. I thank you, my wife thanks you and my trained lobster thanks you too! :)
Was this helpful?
Thank you for voting!