RST399UL Caloric Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
2 Piece Broiler Pan – Part Number: 4396923
$66.88
In Stock
2 Piece Broiler Pan
★★★★★
★★★★★
(2)
Part #4396923
This broiler pan and roasting rack set features a two-piece design that allows fat to drain away for cleaner cooking and reduced splatter. Made with a durable, high-heat resistant porcelain finish, it offers reliable performance and easy cleanup. Measuring approximately 16 3/4 inches long by 12 3/4 inches wide and 1 3/4 inches high, it provides a practical solution for everyday broiling and roasting.
Spark Electrode – Part Number: WP3185804
No Longer Available
Spark Electrode
★★★★★
★★★★★
(4)
Part #WP3185804
This part helps your burner ignite and produce flame.
Wire Oven Rack – Part Number: WP314763J
$74.95
In Stock
Wire Oven Rack
Part #WP314763J
This wire oven rack is used on some ovens and ranges. It is twenty-three inches long and it is made of metal.
Oven Light – Part Number: WP74011278
$127.83
In Stock
Oven Light
★★★★★
★★★★★
(3)
Part #WP74011278
This oven light assembly is a little over four inches long. It is a six hundred an sixty watt light bulb.
Range Light Blub Fluorescent 18 Watt – Part Number: WP95292
$105.34
In Stock
Range Light Blub Fluorescent 18 Watt
Part #WP95292
This light bulb is used in a range's control panel.
Hinge Kit - Left Side – Part Number: R0706010
No Longer Available
Hinge Kit - Left Side
Part #R0706010
Gas Burner Grate – Part Number: WP314647B
No Longer Available
Gas Burner Grate
Part #WP314647B
This gas burner grate is used for some gas ranges and cooktops. This is a black burner grate with each side measuring almost eight inches.
Gas Spark Ignition Switch – Part Number: WPY0300521
No Longer Available
Gas Spark Ignition Switch
Part #WPY0300521
This burner ignition switch is a little over an inch long. It is made of plastic and has a white center cam. This switch has some metallic components.
Hinge Kit - Right Side – Part Number: R0706011
$56.07
Special Order
Hinge Kit - Right Side
★★★★★
★★★★★
(2)
Part #R0706011
This hinge is located on the right side of the door.
Surface Burners Spark Module Kit – Part Number: 1430322
No Longer Available
Surface Burners Spark Module Kit
Part #1430322
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Top Burner Knob – Part Number: Y0300705
No Longer Available
Top Burner Knob
Part #Y0300705
Sold Individually. This knob accepts a D-shaped shaft.
Clock Knob – Part Number: 315210B
No Longer Available
Clock Knob
Part #315210B
This clock knob does not come with a tension spring insert.

Common Symptoms of the RST399UL

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
There was a crack in the porcelain not letting it spark
23 of 36 people found this instruction helpful.
  • Billy from Martinsville, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I used a screwdriver to pry the electrode assy. out of the burner. then disconnected the wire.
Then just connected the new electrode and place the assy, in the burner.
Was this helpful?
Thank you for voting!
pre- igniter went bad. No spark
18 of 25 people found this instruction helpful.
  • Edward from Schaghticoke, NY
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
The trick with any appliance is to remove all the extras,before you get to the problem.Considering that it has electricity, the first step was to turn it off.
After that it was a matter of removing the top burners,range knobs and locate the panel screws that secure it to the stove.Locate the part,remember the colors of where the wire s go,remove,replace wires,replace new part with wires,slide into place, and reassemble.
Turn on electriciy and Tada. Success.

Thank
Was this helpful?
Thank you for voting!
broken ignitor insulation; repeated sparking after burner lit
15 of 21 people found this instruction helpful.
  • Joe from San Bruno, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench (Adjustable)
Disconnected gas & electric connections; lifted unit out of countertop onto padded table upside down. Unscrewed ~16 sheet metal screws for access. Removed bad ignitor by driving off retaining clip. Had to remove burner (3 screws) for access to install retaining clip on new ignitor. Reassembled, reinstalled. Works like new!
Was this helpful?
Thank you for voting!