RN90PLEX (Type 0) Bostitch Nailer - Overview
Sections of the RN90PLEX
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Label,bostitch
PartSelect #: PS10246136
Manufacturer #: 113220
This is an authentic Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The adhesive label attaches to the body of the nailer to identify...
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
-
Richard from Bogalusa, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
10 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!