RH1599RBW00 Roper Freezer - Overview
Sections of the RH1599RBW00
[Viewing 3 of 3]
Manuals & Care Guides for RH1599RBW00
Click to downloadKeep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$17.95
In Stock
Screw
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$28.95
In Stock
Door Gasket
PartSelect #: PS11742202
Manufacturer #: WP4-35260-005
This door gasket forms a tight seal to keep heat or cold contained while preventing air and moisture leaks. A proper seal improves efficiency and helps maintain consistent internal conditions. Replaci...
$251.86
Special Order
Filter Drier Tube
PartSelect #: PS11728084
Manufacturer #: W10843121
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
$54.95
In Stock
ADAPTOR-DEFROST DRAIN-CHESTS
PartSelect #: PS16875968
Manufacturer #: W11663505
$20.95
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Parts Used:
-
Michelle from Richardson, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
83 of 227 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer wasn't cooling
Unpluged the freezer
Removed the knob from the thermostat.
Removed the nut securing the thermostat
Removed the wires from the thermostat
Removed the sensing bulb from the bottom of the freezer by sliding it out, after marking with tape to get the insertion length.
Secured the new thermostat with the new nut and threaded the new sensing bulb thru the plastic loops and inserted it 15 inches into its holder.
Snapped the wiring back on the thermostat and plugged freezer back in.
Removed the knob from the thermostat.
Removed the nut securing the thermostat
Removed the wires from the thermostat
Removed the sensing bulb from the bottom of the freezer by sliding it out, after marking with tape to get the insertion length.
Secured the new thermostat with the new nut and threaded the new sensing bulb thru the plastic loops and inserted it 15 inches into its holder.
Snapped the wiring back on the thermostat and plugged freezer back in.
Parts Used:
-
James from Paden City, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench (Adjustable)
11 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!