Keep the center door flap moving smoothly with this replacement spring for select French door refrigerators. The spring adds tension so the flap opens and closes as the doors move. Replace it if the f...
$5.95
In Stock
Order within the next 3 hrs and your part ships today!
This ice maker assembly in your bottom-freezer refrigerator automatically produces and dispense ice. It consists of a mold for 9 ice cubes, a control device, and a 12-pin wiring connection and housing...
When the folding divider on a French-door refrigerator will not retract, the spring pin or sleeve may be worn or broken. This support piece helps hold the mullion spring in the left door so the flap m...
$5.95
In Stock
Order within the next 3 hrs and your part ships today!
This genuine OEM ice bucket and auger assembly in your fridge is responsible for collecting and storing ice cubes in your freezer. It comes in a white color. If this bucket is damaged, you may notice ...
Refrigerator dispenser lever DA97-08519A is an original equipment manufacturer (OEM) part that fits some Samsung refrigerators. Dispenser lever DA97-08519A releases ice or water when you press the lever.
$158.52
In Stock
Order within the next 3 hrs and your part ships today!
Water inlet valve assembly DA97-07827B is an original equipment manufacturer (OEM) part. Water inlet valve assembly DA97-07827B supplies water to the ice maker and water dispenser in the refrigerator....
$164.33
On Order
Questions And Answers for RF4287HARS/XAA
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Angel
December 15, 2024
Part numbers for Left and Right freezer rails also Freezer Temperature Thermistor.
For model number RF4287HARS/XAA
Hi Angel, thank you for contacting us. The lower hanger assembly for your model is part number PS9604439. This assembly includes the right and left side hangers. The temperature sensor you are looking for is part number PS4138652. We hope that helps!
What is the part number(s) for the inserts that go onto the freezer drawer handles?
For model number RF4287HARS/XAA
Hi Joe, thank you for the question. According to our research, the freezer door handle support for the right side is part number PS4145253, and the freezer door handle support for the left side is part number PS4145248. Glad to be of help!
Water will not dispense but the ice maker is working. Assistance needed
For model number RF4287HARS/XAA
Hi Paul,
Thank you for your question. If water is not dispensing, there are some parts that you will need to check to see which one is causing the issue. You will need to check the water filter, the water inlet valve and the water dispenser actuator. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
John
March 16, 2023
Ice accumalating under freezer drawer-- how do you release drawer to remove ?
For model number RF4287HARS/XAA
Hello John, thank you for contacting us. To remove the freezer drawer, you need to follow these steps: Remove the drawer by pulling it upwards. Remove the tilting pockets by pulling the support guards. Take out the lower basket by lifting it up from the rail. Remove the four hex bolts and lift up the freezer door from the rails. Clean the ice buildup and wait for everything to dry. Reinstall the freezer door and rethread the hex bolts. Install the basket and insert the tilting pockets. Reinstall the drawer by pushing it upwards. We hope that helps!
Was this helpful?
Thank you for voting!
Sandy
September 5, 2023
The part that you press to get ice from ice maker that is above the water button seems to be hanging too low and will press on water button so you get water instead of ice. Do we need new part or can this be fixed? Please send me a pic so I can see if it’s the right part
For model number RF4287HARS/XAA
Hi Sandy, thank you for the question. Based on our research, first, you may need to make sure the ice dispenser lever is properly in place. If the issue persists, then the lever assembly, part number PS4175907, is most likely faulty and may need to be replaced. We have attached the photo of the part for your help. Let us know if you have further questions!
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change when holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
OMG seriously! I stopped into my go-to appliance repair shop to ask about what might be needed to repair the problem with my refrigerator door. They said you will need to replace the Mullion Flap piece. Cost would be $250-300 with part, labor and service. I went on line to see if I could handle the repair process myself. I found a How to - U Tube video and turns out I only needed to replace a little spring and pin not the whole Mullion Flap. Went to Parts select, ordered the spring and pin and did the repair myself in about 5 minutes. Shipping was $7 so I ended up paying $13 total.
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video the installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
