RF28T5001WW/AA (0000) Samsung Refrigerator - Overview

Diagrams for RF28T5001WW/AA

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Bin (Right) – Part Number: DA63-09775A
$54.02
On Order
Ice Maker Assembly – Part Number: DA97-07603B
$156.38
On Order
Ice Maker Assembly
Part #DA97-07603B
This is a 40W/120V ice maker assembly for your refrigerator. Ice maker assemblies are designed to continuously make ice cubes by supplying water through its valve, freezing it, and then ejecting the cubs into the ice bin. This ice maker assembly is made of plastic and measures approximately 12 inches, long by 4.75 inches tall and 4.5 inches wide. This ice maker is an OEM part that does not come with any other installation parts and attaches within the freezer compartment via its single wire harness.
Grommet Hinge – Part Number: DA63-06410A
$5.95
In Stock
Grommet Hinge
Part #DA63-06410A
Filter Cover – Part Number: DA61-04809A
$5.95
In Stock
Filter Cover
Part #DA61-04809A
This shelf support end cap (part number DA61-04809A) is for refrigerators. Shelf support end cap DA61-04809A covers the end of the shelf support. Wear work gloves to protect your hands when installing this part.
Door Closing Mechanism – Part Number: DA97-12625A
$26.16
In Stock
Temperature Sensor – Part Number: DA32-10104N
$59.50
In Stock
Upper Hinge Assembly – Part Number: DA97-12573A
$82.21
In Stock
Upper Hinge Assembly
Part #DA97-12573A
Ice Cube Tray – Part Number: DA63-02284B
$32.84
In Stock
Ice Cube Tray
Part #DA63-02284B
Tapping Screw – Part Number: 6002-000213
$5.95
In Stock
Tapping Screw
Part #6002-000213
Upper Door Hinge (Right) – Part Number: DA97-12574A
$76.02
In Stock
Upper Door Hinge (Right)
Part #DA97-12574A
Evaporator Fan Motor – Part Number: DA31-00334C
$181.38
On Order
Evaporator Fan Motor
Part #DA31-00334C
MOTOR BLDC FAN;12035GE-1
Ice Maker Fill Tube and Heater – Part Number: DA97-00209Z
$100.71
In Stock
Ice Maker Fill Tube and Heater
Part #DA97-00209Z
This is a fill tube and heater for various Samsung refrigerator models. This tube supplies water to the ice maker to allow for the creation of ice cubes, and is equipped with a heater to prevent freezing inside the tube and ensure a proper flow of water. If the heater in this tube stops working, or if water begins leaking from it, it will cause the icemaker to stop working and will require a replacement. Replacing this fill tube will require a screwdriver and wrench, and it will need to be removed and installed though the rear of the refrigerator. This fill tube comes individually, and does not come with any securing screws or other parts.

Common Symptoms of the RF28T5001WW/AA

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator frozen (refrigrator section) and allowing top section to lose cooling
109 of 183 people found this instruction helpful.
  • Richard from GULFPORT, MS
  • Easy
  • 30 - 60 mins
  • Screw drivers
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change w hen holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
Was this helpful?
Thank you for voting!
CLOSING MECHANISM BROKE IN TWO.
27 of 62 people found this instruction helpful.
  • TERRY from BAKERSFIELD, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
OPENED THE LEFT SIDE REFRIGERATOR DOOR WHERE THE DEFECTIVE MECHANISM WAS. GOT UP ON THE FIRST STEP OF THE STEP STOOL,REMOVED THE PHILLIPS HEAD RETAINING SCREW FROM THE BROKEN PART.PUT THE NEW CLOSING MECHANISM IN PLACE AND RE-INSTALLED THE PHILLIPS HEAD SCREW. STEPPED DOWN FROM THE STEP STOOL AND SHUT THE REFRIGERATOR DOOR.
Was this helpful?
Thank you for voting!
lower ice maker water fill tube frozen... suspected that the fill tube heater went bad.
13 of 25 people found this instruction helpful.
  • Max E from MONETT, MO
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers
Interestingly, the few authorized samsung parts suppliers I found declared that this model did not have a lower icemaker, whereas this company actually had the specific part. The heater swap is completely straightforward, and simple, but for one detail. The insulation wrap is easily torn when pulling the tube out and my time was spent f inding a suitable material to patch the hole. I would recommend purchasing a new tube with heater element and wrap pre-installed. This issue in no way diminished my satisfaction with the product or the prompt delivery time.
Was this helpful?
Thank you for voting!