RF220DCTAS8 Samsung Refrigerator - Overview

Models starting with RF220DCTAS8

Keep searches simple, eg. "belt" or "pump".
Door Bin and Guard – Part Number: DA97-12935A
Door Bin and Guard
★★★★★
★★★★★
(1)
PartSelect #: PS5575404
Manufacturer #: DA97-12935A
$94.78
  On Order
Hinge – Part Number: DA61-08305A
Hinge
★★★★★
★★★★★
(1)
PartSelect #: PS4145262
Manufacturer #: DA61-08305A
$10.64
  In Stock
Refrigerator Flipper Assembly – Part Number: DA97-12947A
Refrigerator Flipper Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS5575408
Manufacturer #: DA97-12947A
$180.62
  In Stock
Crisper Drawer Cover Assembly - Refrigerator – Part Number: DA97-13029A
Crisper Drawer Cover Assembly - Refrigerator
PartSelect #: PS5575413
Manufacturer #: DA97-13029A
$212.69
  In Stock
Ice Maker Assembly – Part Number: DA97-07603B
Ice Maker Assembly
PartSelect #: PS5575313
Manufacturer #: DA97-07603B
$133.98
  On Order
Tapping Screw – Part Number: 6002-000520
Tapping Screw
PartSelect #: PS4133205
Manufacturer #: 6002-000520
$2.99
  In Stock
Vegetable Drawer Assembly – Part Number: DA97-13018A
Vegetable Drawer Assembly
PartSelect #: PS5575412
Manufacturer #: DA97-13018A
$151.74
  In Stock
Grommet Hinge – Part Number: DA63-06410A
Grommet Hinge
PartSelect #: PS4151521
Manufacturer #: DA63-06410A
$4.89
  In Stock
Filter Cover – Part Number: DA61-04809A
Filter Cover
PartSelect #: PS4144722
Manufacturer #: DA61-04809A
$2.99
  On Order
Refrigerator Door Gasket – Part Number: DA97-05253Y
Refrigerator Door Gasket
PartSelect #: PS5575292
Manufacturer #: DA97-05253Y
$135.47
  In Stock
Door Closing Mechanism – Part Number: DA97-12625A
Door Closing Mechanism
★★★★★
★★★★★
(2)
PartSelect #: PS4176636
Manufacturer #: DA97-12625A
$27.65
  On Order
Temperature Sensor – Part Number: DA32-10104N
Temperature Sensor
★★★★★
★★★★★
(1)
PartSelect #: PS4138666
Manufacturer #: DA32-10104N
$36.08
  On Order

Common Symptoms of models starting with RF220DCTAS8

[Viewing 6 of 6]
Door won’t open or close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge too warm
Fixed by
these parts
Fixing
Show All
Ice maker not making ice
Fixed by
these parts
Fixing Fixing
Show All
Fridge too cold
Fixed by
these parts
Fixing
Show All
Ice maker won’t dispense ice
Fixed by
these parts
Fixing
Show All
Frost buildup
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Evaporator frozen (refrigrator section) and allowing top section to lose cooling
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change when holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
Parts Used:
Temperature Sensor
  • Richard from GULFPORT, MS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
106 of 180 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
CLOSING MECHANISM BROKE IN TWO.
OPENED THE LEFT SIDE REFRIGERATOR DOOR WHERE THE DEFECTIVE MECHANISM WAS. GOT UP ON THE FIRST STEP OF THE STEP STOOL,REMOVED THE PHILLIPS HEAD RETAINING SCREW FROM THE BROKEN PART.PUT THE NEW CLOSING MECHANISM IN PLACE AND RE-INSTALLED THE PHILLIPS HEAD SCREW. STEPPED DOWN FROM THE STEP STOOL AND SHUT THE REFRIGERATOR DOOR.
Parts Used:
Door Closing Mechanism
  • TERRY from BAKERSFIELD, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
26 of 61 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lower ice maker water fill tube frozen... suspected that the fill tube heater went bad.
Interestingly, the few authorized samsung parts suppliers I found declared that this model did not have a lower icemaker, whereas this company actually had the specific part. The heater swap is completely straightforward, and simple, but for one detail. The insulation wrap is easily torn when pulling the tube out and my time was spent finding a suitable material to patch the hole. I would recommend purchasing a new tube with heater element and wrap pre-installed. This issue in no way diminished my satisfaction with the product or the prompt delivery time.
Parts Used:
Water Heater
  • Max E from MONETT, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
13 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!