RBE-533 Frigidaire Range - Instructions

PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.

removed screws holding element and detached wires and simply removed it; no problem. Reversed the process to install the new one. The great thing is that I ordered this element one morning and received it the very next day! I have saved this website for future problem solutions because I know they are well organized and dependable. Thanks for saving our week!!

After removing the 2 screws, pulling the element out, & disconnecting the 2 wires, I started installing the new element. 20 years ago, this may have been easy, but...after so many years of use, and grease fumes and who knows what, the new connections were difficult to connect. However , after a few choice words and a few alcoholic beverages, the new burner was installed and it works great! Thank you & keep stocking those "old" parts. I have 3 more burners & an oven fixture left ta go!

I chickened out and called a repair service. I don't have the guts for working with 220. But it was still a great deal. An appliance store in Brunswick, Ohio said part was no longer available but you found it for me. Thank you ever so much. The cost for part and repairman was less than $150, which is a whole lot less than a new range.

It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!

Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely.
Once all was replaced and reinstalled the oven has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.

my original part arrived and it did not fit. When I called to explain the problem I was told it was the wrong part. The big problem is... Frigidaire calls the receptacle a terminal block kit as well as a terminal block kit which is a totally different part. I tried to explain that to several different folks I spoke to at your company as well as Frigidaire but I'm not sure if I got that point across. Take a look at part # 530 393 5058 and part # 530 440 9888 and you will see that they both mention terminal block kit. Hopefully the part I am getting from Frigidaire is an OEM part and will fit.

Watching the video showed an easy, unscrew and screw back on process while connecting the wires back. It was really that simple. Once it was complete (not even 10mins), plugged it back in, and its been working great since.

Took 3 panels off to get to the electric block. Replaced electrical block and put it back together. Still no change.