RB197ABRSXAA Samsung Refrigerator - Overview

Diagrams for RB197ABRSXAA

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice Maker Assembly – Part Number: DA97-07603B
$156.38
On Order
Ice Maker Assembly
Part #DA97-07603B
This is a 40W/120V ice maker assembly for your refrigerator. Ice maker assemblies are designed to continuously make ice cubes by supplying water through its valve, freezing it, and then ejecting the cubs into the ice bin. This ice maker assembly is made of plastic and measures approximately 12 inches, long by 4.75 inches tall and 4.5 inches wide. This ice maker is an OEM part that does not come with any other installation parts and attaches within the freezer compartment via its single wire harness.
Tapping Screw – Part Number: 6002-000520
$5.95
In Stock
Tapping Screw
Part #6002-000520
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
Refrigerator Crisper Drawer – Part Number: DA97-11620B
$181.12
On Order
Refrigerator Crisper Drawer
★★★★★
★★★★★
(1)
Part #DA97-11620B
The crisper drawer stores fruits and vegetables at a humidity level that helps keep them fresh longer.
Water Inlet Valve – Part Number: DA62-01477A
$110.59
On Order
Ice Cube Tray – Part Number: DA63-02284B
$32.84
In Stock
Ice Cube Tray
Part #DA63-02284B
Tapping Screw – Part Number: 6002-000213
$5.95
In Stock
Tapping Screw
Part #6002-000213
Caster Shaft – Part Number: DA66-00649B
$9.18
In Stock
Caster Shaft
Part #DA66-00649B
Fan Blade Assembly – Part Number: DA31-00010D
$28.06
In Stock
Fan Blade Assembly
Part #DA31-00010D
This condenser fan blade (part number DA31-00010D) is for refrigerators. Condenser fan blade DA31-00010D moves air across the condenser coil to cool the hot refrigerant before it enters the evaporator. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part.
Rivet Caster – Part Number: DA61-01920A
$5.95
In Stock
Rivet Caster
Part #DA61-01920A
This roller wheel axle pin (part number DA61-01920A) is for refrigerators. Roller wheel axle pin DA61-01920A attaches the roller wheel to the roller wheel bracket. Wear work gloves to protect your hands during the repair.
Hinge (Upper) – Part Number: DA97-06715C
$69.31
In Stock
Hinge (Upper)
Part #DA97-06715C
Drain Tube – Part Number: DA97-04049D
$34.47
In Stock
Drain Tube
Part #DA97-04049D
Cover - Sensor;AD,PP,T1.0, – Part Number: DA63-02183A
$5.95
In Stock
Cover - Sensor;AD,PP,T1.0,
Part #DA63-02183A

Common Symptoms of the RB197ABRSXAA

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The ice maker was overflowing and freezing over
2 of 6 people found this instruction helpful.
  • Paul from Streator, IL
  • Really Easy
  • 30 - 60 mins
  • Socket set, Wrench set
I watched several repair videos and decided I could do this because I have been doing mechanical work for over fifty years.The videos convinced me it needed replaced it is a 2009 model I bought new. I ordered the new part from parts select it came in 3 or 4 days.The hardest part was removing the freezer door and reinstalling when I was do ne.That wasn’t complicated just awkward.Removing the ice maker was simple and replacing it with the new one was easy.There was a protective plate on the front of the old one that wouldn’t fit on the new one.So I left it off.So far it has been working very well.
Was this helpful?
Thank you for voting!
Ice tray had cracked and broken. The water is still not filling up my ice tray.
7 of 34 people found this instruction helpful.
  • Timothy from SALISBURY, NC
  • Easy
  • 15 - 30 mins
The replacement was fairly simple. I removed the existing tray and detached the water line. Once the water line water reattached to the new tray I inserted into the ice maker.

*** The problem I'm having now is the water is not filling up the tray***
Not sure what I did wrong? Any help would be greatly appreciated!!!
Was this helpful?
Thank you for voting!