It is an OEM component which is designed for use with air compressors. This special nut sleeve assembly secures the pressure relief tube to the pressure switch. It is a high-quality replacement for a ...
This is an authentic replacement part manufactured for use with Porter Cable air compressors. The safety valve is used to prevent the tank from overpressurizing by letting air out of the tank when a s...
This is an Genuine OEM replacement part used on Air Compressors. The gauge registers pressure readings and allows you to maintain needed pressure. This Gauge is Sold Individually. You would need a Wr...
It is a genuine manufacturer sourced replacement part that is specially designed for Craftsman air compressors. This gasket provides an air-tight seal for the cylinder head assembly. Over time gaskets...
This is an authentic Porter Cable replacement part, sourced from the original manufacturer for use with air compressors. The metal plug is commonly used to seal the outlet on the manifold assembly. Th...
This is a genuine OEM sourced component which is specially designed for use with air compressors. A strain relief is designed to slide onto your cord and fit securely at the end, where it's firm rubbe...
$5.95
Special Order
Questions And Answers for RAC5E60VAD
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Perseverance-after having a hard time removing drain cock , oil drain and oil fill I could not exactly see where air filter was located, Found Air filter Pulled it out with needle nose pliers and could not find one locally. Luckily I found this site ordered filter and they shipped right away. Got my filter and the old Air Compressor is alive again . Thank you so very much. You have a customer for life. Thanks, Mary
1. Removed air pump from compressor 2. Removed oil 3. Removed 8 bolts holding bottom of air pump 4. Replaced bottom with the new gasket 5. Replace the 8 bolts 6. Refill 16 oz oil 7. Reinstall air pump to compressor