RA5B60V2D (Type 0) DeVilbiss Compressor - Overview

This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by te...Read morension of the spring inside the valve. The spring can wear out, and leave the valve open at a lower pressure than what is set to turn the switch off, and will not allow pressure to build inside the tank. This safety valve has a thread sealant pre-applied, so additional thread sealant is not required, the safety valve is sold individually.

When using an air compressor, moisture naturally builds up inside the tank as air is compressed. If this water isn’t drained regularly, it can lead to internal rust and damage over time. That’s where the drain valve comes in—it allows you to release the built-up water and keep your tank in good condition. Located at the bottom of the tank...Read more, this valve should be opened after each use to prevent corrosion and extend the life of your compressor. If you tend to leave air in the tank for long periods, water accumulation can be even more significant. This replacement drain valve features a thread size of 18 TPI and is sold individually. Regular maintenance with a working drain valve helps ensure safe and efficient compressor operation.

This is an authentic Porter Cable replacement part, sourced from the original manufacturer for use with air compressors. The metal plug is commonly used to seal the outlet on the manifold assembly. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

Meet your simple solution to appliance pressure problems: the Craftsman Relief Valve. If you've been struggling with a Craftsman appliance that isn't working quite right this might be the part you need. This relief valve is expertly made to manage and control pressure keeping your appliance running smoothly so you can get on with your day...Read more without any appliance-related hiccups. Designed from high-quality materials this part is incredibly durable and promises long-lasting performance. So you won't have to worry about replacements any time soon. In other words this part not only fixes your problem but also prevents more from cropping up. Our Craftsman relief valve fits snugly and securely into a wide range of Craftsman models. So whether you've got an old favorite or the latest model chances are this little wonder will work for you. So let's get your appliance back to its best form. Treat it with this hard-working reliable Craftsman relief valve and experience an effortless worry-free use again. With just this simple part replacement your appliance can work like new saving you the cost and inconvenience of a full appliance replacement.

It is an OEM component which is designed for use with air compressors. This special nut sleeve assembly secures the pressure relief tube to the pressure switch. It is a high-quality replacement for a damaged or a missing hardware that was installed on a new unit. One durable metal nut sleeve assembly is included. A wrench will be needed t...Read moreo perform this repair. Check the appropriate diagrams for your model to ensure the proper replacement procedure. Make sure to drain the air before starting this repair.

This replacement screw is a genuine OEM sourced item commonly utilized on air compressors and pressure washers. It is a standard hardware which has multiple applications depending on the unit. Please make sure to check diagrams of your model for the correct location and used of this screw. This part is made from durable metal and it is sold individually. You will need a wrench to install or remove this hardware.

This is an OEM part sourced directly from the manufacturer. The check valve is designed for use in Craftsman air compressors. This part is made of metal, and is placed in the tank assembly to control the flow of air through the tube. You will require a wrench when replacing this part. This item is sold individually.