This is the replacement charcoal filter for your microwave. It is silver and black in color and measures approximately 10 inches by 2 ½ inches. The charcoal filter removes cooking odors from the air that circulates through the microwave vent. You will likely need to replace the charcoal filter if you notice any damage to it, or if it has...Read more been in your microwave for a long time. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
This is a genuine replacement 40 watt bulb for a microwave. The bulb is meant to light up the underside of the microwave or inside of your microwave when the door is open or during use. If your bulb is not illuminating, you may need to replace it. If the bulb is shattered, be sure to use protective gloves during replacement. Always unplug...Read more your microwave before completing any repairs. We suggest ordering a spare, as this is a common wear part.
Uneven tray movement or loud rattling can be caused by a cracked roller ring or a wheel that no longer turns. The ring supports the glass tray and helps it rotate smoothly during cooking. First remove food buildup and check the tray, center drive piece, and oven floor for damage. Match the replacement to the full appliance model because r...Read moreing size and wheel position can vary. Disconnect power before inspection and handle the glass tray with care. Set every wheel flat in its guide, then turn the tray by hand to check its movement.
Are you facing issues with your microwave vent grille? The Microwave Vent Grille Assembly from GE is here to help. This small but mighty part plays a crucial role in maintaining your microwave's efficiency. It not only neatly covers your microwave's internal workings for a clean, professional look, but it also allows air to flow smoothly ...Read morefor optimal operation. The assembly may include multiple parts which you can refer to your microwave's parts diagram for ? so you can be sure that every detail is taken care of. Before you kick-start the installation process, always remember to unplug your microwave and wear protective gloves for your safety. Let's get your beloved microwave back on its feet! You can count on GE's unmatched dependability and expertise for your appliance repair essentials. They're determined to make your at-home appliance repairing experience as easy and worry-free as possible. Please check our website to know if this part is compatible with your appliance model. Remember, a functioning appliance is just one part away! Happy repairing!
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part.
If your microwave suddenly stopped working, this 20-amp fuse might be the reason. It’s designed to blow when there’s a power surge, protecting your appliance from damage. This genuine part fits many GE, Hotpoint, and Frigidaire models. Just check your model number before replacing it.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tina - For model number PVM9005SJ3SS
December 27, 2021
The fan will not turn off. It runs non stop
Hello Tina, Thank you for the question. In most cases this is caused by a faulty exhaust fan thermostat. You can test the thermostats with a multi meter to check for continuity. We hope this helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Michael - For model number PVM9005SJ3SS
March 6, 2023
What covers need to come off to replace fuse in my ge profile microwave pvm9005sj3ss
Hello Michael, thank you for contacting us. To replace the fuse, you need to unscrew the screws to remove the top outer case of the oven. Replace your fuse, part number PS3486694, in the fuse holder on a small printed circuit board of noise filters which contains capacitors, resistors, and inductors. We hope that helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Dennis - For model number PVM9005SJ3SS
December 13, 2023
Need to replace rotating glass plate.
Hi Dennis, thank you for reaching out. The glass tray for your model is part number PS11736545. We hope that helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Don - For model number PVM9005SJ3SS
January 27, 2024
Does this GE microwave model have an inside cabinet light besides the surface light?
Hi Don, thank you for getting in touch. We have found that your model comes with an interior light bulb, part number PS8767095. Glad to be of help!
Hi Paulette, thank you for reaching out. Ensure that the charcoal filter is properly aligned and seated in its compartment. If the filter is not aligned correctly, the door may not close properly. If it is fine, you may need to replace the vent grille assembly, part number PS11762613, as the charcoal filter door comes attached to it. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
bulb burned out under the microwave that lights the cooktop underneath
32 of 63 peoplefound this instruction helpful.
Margaret from TOANO, VA
Easy
Less than 15 mins
Screw drivers
got a screwdriver and opened the glass door over the light bulb - changed the bulb and put the glass door back with the screwdriver.
Was this helpful?
Thank you for voting!
Had to replace charcoal filter
15 of 25 peoplefound this instruction helpful.
Jared from SIERRA VISTA, AZ
Easy
15 - 30 mins
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimen
... Read moresions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Read less
Was this helpful?
Thank you for voting!
Thermal Fuse out
5 of 5 peoplefound this instruction helpful.
Jorge from PANORAMA CITY, CA
A Bit Difficult
30 - 60 mins
Screw drivers
There are videos on YouTube on how to do this but there are a couple of things I’m going to recommend. Color code your plugs when you take the main control panel off, be patient when removing the screws on the thermal fuse use a 45 degree screwdriver but replace the screws with a small hex head self tapper screw for next time. The differ
... Read moreence between these two lookalike fuses is that one is for the fan and the other one is the thermal there’s a price difference and volts so read the back of the bad fuse. These guys are great man and thank you for helping me out.