PS80983 Homelite Pressure Washer - Overview

This is a genuine OEM replacement kit. This kit is threaded into the pump assembly. It is connected to the Chemical Siphon Tube that is placed in a container that contains the cleaner you are using. The O-Rings are placed on the Bronze nozzle, then the spring will go in first, then the steel ball, then thread in the nozzle.

This is an authentic OEM quick connect nozzle, guaranteed compatible with the Ryobi and Homelite machines listed below. This is a standard green pressure washer tip with a twenty-five (25) degree spray width. It is a nozzle used for regular cleaning duties such as removing dirt from decks or cars, and works very well with soap/detergents...Read more. It is one step more powerful than the white forty degree tip (the least powerful of the quick change nozzles). This is a commonly used nozzle so a backup would come in handy. Sold individually.

This is an authentic OEM nozzle made to fit the Ridgid and Homelite pressure washers listed below. As a standard sized white nozzle, this part features a forty (40) degree spray width. It is least powerful of the quick connect tips. This nozzle is best suited for light duty washing on surfaces prone to scratching, breakage, and/or paint loss such as aluminum siding, stucco, or cars. This item is sold individually.

(25 ft., 3000 psi) This water hose is for pressure washers. Water hose carries water from the pump to the spray wand. Wear work gloves to protect your hands when installing this part.

This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. It is available as an individual replacement part, but also includes the metal bolt and the rubber o-ring.

Genuine OEM replacement part, this item is sold individually. This is the part on the pressure washer that you connect the hose to. The hose then connects to the handle assembly and spray wand.