PS80945A Homelite Pressure Washer - Overview
Diagrams for PS80945A
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Add Oil Label
Part #940871002
Wand Holder
Part #519313007
Detergent Suction Kit
Part #308452002
This is a genuine OEM replacement kit. This kit is threaded into the pump assembly. It is connected to the Chemical Siphon Tube that is placed in a container that contains the cleaner you are using. The O-Rings are placed on the Bronze nozzle, then the spring will go in first, then the steel ball, then thread in the nozzle.
Inlet Tube
Part #308861003
This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. It is available as an individual replacement part, but also includes the metal bolt and the rubber o-ring.
Outlet Tube
Part #308862003
Genuine OEM replacement part, this item is sold individually. This is the part on the pressure washer that you connect the hose to. The hose then connects to the handle assembly and spray wand.
Pressure Washer Blue Soap Tank Cap
Part #310650004
This is an authentic manufacturer made replacement part which is specially designed for use with Ryobi pressure washers. The detergent tank cap seals the detergent tank to ensure the soap stays contained as well as keep debris from getting in the tank. The cap is made of plastic and is sold individually. No tools are required for installation, simply screw on the cap firmly to the detergent tank to secure.
Front Frame
Part #310742011
Bolt (M6 X 55 Mm)
Part #661834002
Wear Pad
Part #570554002
This rubber wear pad mounts to the frame of select gas pressure washers. It helps reduce vibration, supports the machine, and keeps the metal frame from scratching the ground. The pad measures about 1.5 inches long, 1.2 inches wide, and 1.6 inches high. Replace it if it is cracked, torn, flattened, loose, or missing. Use the complete pres...Read moresure washer model number to guarantee the proper fit. Turn off the engine, let it cool, and disconnect the spark plug wire before installation.
Read less
Wand Warning Label
Part #940654083
Unloader kit
Part #310924003
This part is an OEM from Ryobi. The pump unloader valve is a pressure washer component. The metal item is designed to relieve the engine from trapped air, and is sold individually. A screwdriver, needle nose pliers and a wrench set are often needed for the installation.
Engine Plate
Part #638662027
Common Symptoms of the PS80945A
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More