PS803125 ((Rev01)(090079381)(10-19-17)) Homelite Pressure Washer - Overview

This is a genuine OEM replacement kit. This kit is threaded into the pump assembly. It is connected to the Chemical Siphon Tube that is placed in a container that contains the cleaner you are using. The O-Rings are placed on the Bronze nozzle, then the spring will go in first, then the steel ball, then thread in the nozzle.

This is an authentic OEM quick connect nozzle, guaranteed compatible with the Ryobi and Homelite machines listed below. This is a standard green pressure washer tip with a twenty-five (25) degree spray width. It is a nozzle used for regular cleaning duties such as removing dirt from decks or cars, and works very well with soap/detergents...Read more. It is one step more powerful than the white forty degree tip (the least powerful of the quick change nozzles). This is a commonly used nozzle so a backup would come in handy. Sold individually.

This is an authentic OEM nozzle made to fit the Ridgid and Homelite pressure washers listed below. As a standard sized white nozzle, this part features a forty (40) degree spray width. It is least powerful of the quick connect tips. This nozzle is best suited for light duty washing on surfaces prone to scratching, breakage, and/or paint loss such as aluminum siding, stucco, or cars. This item is sold individually.

This is an original replacement part designed for the Homelite and Ryobi pressure washers listed below. This is a low pressure nozzle which draws soap/chemical mixture from the detergent tank, and gently spray a light coat onto a surface for cleaning. This soap nozzle may also be called a chemical injector tip. One (1) nozzle is included.

Genuine OEM replacement part, this item is sold individually. This is the part on the pressure washer that you connect the hose to. The hose then connects to the handle assembly and spray wand.

This is an authentic manufacturer made replacement part which is specially designed for use with Ryobi pressure washers. The detergent tank cap seals the detergent tank to ensure the soap stays contained as well as keep debris from getting in the tank. The cap is made of plastic and is sold individually. No tools are required for installation, simply screw on the cap firmly to the detergent tank to secure.

It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.

This rubber wear pad mounts to the frame of select gas pressure washers. It helps reduce vibration, supports the machine, and keeps the metal frame from scratching the ground. The pad measures about 1.5 inches long, 1.2 inches wide, and 1.6 inches high. Replace it if it is cracked, torn, flattened, loose, or missing. Use the complete pres...Read moresure washer model number to guarantee the proper fit. Turn off the engine, let it cool, and disconnect the spark plug wire before installation.

This is an OEM part sourced directly from the manufacturer. The label is commonly found on pressure washers and generators from Homelite, Ridgid, and Ryobi. This part is made of paper with an adhesive backing, and is generally placed on the fuel tank to indicate what kinds of fuel are safe to use with the machine. No tools are required...Read more when replacing this item. Simply remove the old part, peel off the protective backing, and carefully stick the new part into place. This item is sold individually.

This part is an OEM from Ryobi. The pump unloader valve is a pressure washer component. The metal item is designed to relieve the engine from trapped air, and is sold individually. A screwdriver, needle nose pliers and a wrench set are often needed for the installation.