This valve controls the flow of water or gas into the appliance, opening and closing as needed for proper operation. Reliable valve performance supports efficiency and leak prevention. Replacing a mal...
This oven igniter heats up to ignite the gas burner, helping your oven reach and maintain the proper cooking temperature. It’s a dependable replacement when the oven won’t heat, takes too long to preh...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Erik
December 6, 2019
Two left burners xlo stopped working at the same time, no gas, but clicking
For model number PRG366
Hello Erik, thank you for writing. This sounds like a faulty Spark Module, part number PS8737287 for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Erik
December 6, 2019
All 6 ignitors starts to click when any of the burners is turned on, will not stop.
For model number PRG366
Hello Erik,
Thank you for your question. A common cause of igniters clicking constantly is excess moisture in the area, we suggest wiping the burners and igniters clean before trying it again, if the problem still persists, the spark module under part PS8737287 for your model needs to be replaced. Hope this helps!
Hello Ronald. Thank you for the question. This sounds to be an issue with the Temperature Regulator, PartSelect Number PS8710802. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Removed knobs and venturies. Unplugged electrical inputs. Lifted top plate. Replaced potentiometer. Replaced parts and plugged in electric supplies. Tested. Piece of cake, except for locating replacement potentiometer.
Found the service manual for Thermador CT130/CT230 online, which provides fine step-by-step instructions for this replacement (on page 2-21 in the version of the manual that I found).
It's service manual 92-02-020 (this is the March 1999 version). Should be able to find it for FREE download on several sites. Here's just one example:
