Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
$64.15
In Stock
Order within the next 7 hrs and your part ships today!
This part has been replaced by the manufacture. It may differ in appearance but will still function the same.
$176.51
In Stock
Order within the next 7 hrs and your part ships today!
Questions And Answers for PLES389ECE
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marcus
January 20, 2020
No power too digital control panel or oven butt all 4 burners come on and work fine ????
For model number PLES389ECE
Hello and thank you for writing.
This could possibly indicate a malfunctioning main terminal block PS471605, you should check for signs of damage, and replace the part(s) as necessary. We hope this helps. Please contact us anytime if you require further assistance.
I turned the oven on. While warming up i heard 2 loud pops. I’m now receiving a f20 error code and neither the oven or any burners up top work. Thanks for any info you can provide
For model number PLES389ECE
Hi Jared. Failed communication control link error – Inspect the P4 connection on the oven control (EOC) and ensure that the Surface Element Control (P11 ESEC) circuit is in order. If connections are intact, check the User Interface Board (UIB), the Surface Element Control Board (ESEC) or the electronic control (EOC). Replace any of these if faults are discovered. Thank you for your question and good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to replace the element anyway.
I ordered from PD and the part arrived just a few days letter by regular shipping. I undid the screws holding in the element, undid the wire connectors and replaced the broken element with the new one. The element worked like a charm and I was back in business for cooking.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.