This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
This dishwasher water inlet valve is a genuine OEM component designed to regulate water flow into the appliance during the fill cycle. Typically located behind the lower kickplate panel in either fron...
The upper spray arm helps distribute water from the top of the dishwasher tub.This spray arm is a genuine OEM replacement part for your dishwasher. This spray arm is for the upper part of your dishwas...
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
This part is a replacement spray arm support for your dishwasher. It is made of white plastic and is approximately 3 inches long, 1 inch wide, and 3 inches tall. This is the support for the lower spra...
Keep your dishes steady during the wash with this fold-down fence and clip assembly for Frigidaire dishwashers. It attaches to the rack and helps hold items like cups and small plates in place. If you...
No Longer Available
Questions And Answers for PLD2855RFC1
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
July 31, 2021
How to install toe guards and What screws to use?
For model number PLD2855RFC1
Hello Richard, Thank you for contacting us. We have researched the model you have provided and have found the parts you are looking for are the Kickplate Grill PartSelect Number PS3633191, Toe Grille PartSelect Number PS11704182 and PartSelect NumberPS649154. https://youtu.be/qf0Vb8C_v58?t=3. We hope this helps!
Was this helpful?
Thank you for voting!
Bob
February 28, 2023
The dishwasher is making a high pitched sound when we run it. Could a belt be slipping?
For model number PLD2855RFC1
Hi Bob, thank you for contacting us. First, you need to check the water valve. The diaphragm inside the inlet valve can deteriorate and deform after years of use. When this happens, the water passing through the valve can produce a loud buzzing, squealing, or whistling sound. If this does not help, we recommend you check the circulation pump, part number PS3497737. It pumps water through the spray arms during the dishwashing cycle. And the drain pump, part number PS1765174. It removes the water from the dishwasher tub during the drain phase of the dishwashing cycle. We hope this information helps!
Repair was simple. I unscrewed the old grommet which held the old spray arm and screwed-on the new one. About 30 seconds was required. Other people having this problem should note that the spray-arm is made of three pieces which are inseparable when the arm is new. The arm is sold in this form. However, when your machine is having the problem that the arm falls off, the three pieces become separate. When you want to replace the spray arm, only one new part needs to be ordered because this part encompases all three components.
Remove the bottom cover plate. Disconnect the water inlet and black rubber hose. Remove 2 mounting screws. Pull out electrical connector. Reverse order. Be sure to get the brass inlet connector really tight so it won't leak. I did the final tightning after the part is mounted. Not a bad repair at all. The only problem was that it leaked in the first place and messed up my subfloor and laminate flooring.
