Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tammy
July 27, 2021
What do I need to do to get two of our 4 burners to ignite using the switch?
For model number PLCS389DCB
Hello Tammy, Thank you for the question. The Burner should ignite after turning the Knob. If this does not ignite the burner, you may have a defective igniter in the burner. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kaye
March 12, 2024
Why does my Slide in Dual Fuel Range have a F1 code on the digital panel. It beeps, I have to unplug it. Please tell me what’s wrong with it and can it be fixed. . I love my stove . Thank you
For model number PLCS389DCB
Hello Kaye, thank you for your inquiry. According to our research, the error code F1 indicates a runaway oven temperature. This means that the electronic oven control has detected abnormally high temperature in the oven cavity. We would recommend checking the temperature sensor, part number PS820208. It measures the oven temperature and sends the information to the control board. You may need to replace it to fix the issue. We hope this helps!
Hello Rick, thank you for getting in touch. The lower oven rack is part number PS1529456, and the upper oven rack is part number PS1529560. If you need help placing an order, customer service is open 7 days a week!
How do I get a new control panel for a dual fuel Frigidaire by Electrolux range.
For model number PLCS389DCB
Hi Carol,
Thank you for your question. The panel is sold in 2 pieces. The part number listed under your model number for the front face of the panel is PS900095 and the part number for the panel frame is PS820925. We hope this helps. Thank you and have a great day.
If i set a temperature to cook something it comes out burn like if k had set it to high
For model number PLCS389DCB
Hello Marcos, thank you for your inquiry. Typically when this issue occurs, it is due to a malfunctioning temperature sensor. We recommend replacing this item, PartSelect number PS820208. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
The repair was simple; first I removed the 2 screws from the old element and disconnected the wires and then I inserted the new element reconnected the wires and replaced the screws . The repair was easy and took less that 15 min. The oven works as good as new and I saved alot of money by doing it myself.
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to replace the element anyway.
I ordered from PD and the part arrived just a few days letter by regular shipping. I undid the screws holding in the element, undid the wire connectors and replaced the broken element with the new one. The element worked like a charm and I was back in business for cooking.