This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in co...
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part ...
This is a burner cap for your gas range. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. The cap is black in color and...
This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karen
November 13, 2023
The lettering around the knobs that’s says low, high, med, it’s wearing off. I need new lettering
For model number PGP7030SL1SS
Hello Karen, thank you for the question. According to our research, you may need to replace the maintop assembly, part number PS12299350, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Lauren
November 15, 2023
is there a griddle that will fit the left side burners for this model? Obviously since there's only 1 burner in the middle, a regular griddle won't work.
Thanks
For model number PGP7030SL1SS
Hi Lauren,
Thank you for your question. The part number for the griddle is PS12341977. We hope this helps!
Was this helpful?
Thank you for voting!
Chris
December 13, 2023
The control knob connection to the post is a black 1/2 inch diameter hard rubber/ plastic fitting ...slips on post.
Part number ? I need 4.
For model number PGP7030SL1SS
Hello Chris, thank you for reaching out. The part you are looking for does not come separately. It comes as a part of a gas valve. Your model comes with 5 gas valves. The gas valves for your model are:
The right rear gas valve is part number PS12299288.
The right front gas valve is part number PS12295277.
The left front gas valve is part number PS12296250.
The left rear gas valve is part number PS12299289.
The center gas valve is part number PS12295184.
We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
New burner cap replaced old; just placed over burner; no tools required.
One suggestion: burner cap should have been shipped with thicker bubble protection (easy to do). It was minimally wrapped and placed in a thin, bubble envelope, risking damage in shipping process. Luckily, the burner arrived in tact and usable.
The following are steps in replacing a burner electrode for GE Profile Cook Top Model PGP7030DL1BB 1. Shut off gas and unplug electrical plug 2. Remove all stove grates and turn on knobs 3. Remove all burner covers 4. Remove all screws [three for each burner] 5. Remove two screws near front by removing rubber grate grommets 6. Carefully Lift off stove cover and set aside 7. Remove shield near back of stove top. This exposes all burner wires 8. Remove electrode to burner which does not lite by sliding out clip at bottom of electrode—note color code of wire and replace with same. Change one electrode at a time to insure wire color code is correct. 9. Reassemble in reverse order of steps 1-8