Models > PGB980ZEJ2SS

PGB980ZEJ2SS General Electric Range - Overview

Sections of the PGB980ZEJ2SS

[Viewing 7 of 7]
Body Parts Diagram and Parts List for General Electric Range
Body Parts
Control Panel & Cooktop Diagram and Parts List for General Electric Range
Control Panel & Cooktop
Convection Fa Diagram and Parts List for General Electric Range
Convection Fa
Door Diagram and Parts List for General Electric Range
Door
Gas & Burner Parts Diagram and Parts List for General Electric Range
Gas & Burner Parts
Lower Oven Diagram and Parts List for General Electric Range
Lower Oven
Upper Oven Diagram and Parts List for General Electric Range
Upper Oven
Keep searches simple, eg. "belt" or "pump".
Burner Cap - 15K – Part Number: WB28K10222
Burner Cap - 15K
★★★★★
★★★★★
(3)
PartSelect #: PS954107
Manufacturer #: WB28K10222
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in co...
$36.24
  Special Order
Burner Cap - Black - Medium - 9500 BTU – Part Number: WB29K10023
Burner Cap - Black - Medium - 9500 BTU
★★★★★
★★★★★
(3)
PartSelect #: PS954202
Manufacturer #: WB29K10023
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part ...
$38.51
  Special Order
LEG LEVELER – Part Number: WB02K10182
LEG LEVELER
PartSelect #: PS2339673
Manufacturer #: WB02K10182
$11.80
  Special Order
CENTRAL GRATE – Part Number: WB31X24737
CENTRAL GRATE
★★★★★
★★★★★
(7)
PartSelect #: PS11721465
Manufacturer #: WB31X24737
  No Longer Available
Ignitor Mounting Screw – Part Number: WB1X1293
Ignitor Mounting Screw
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$11.80
  Special Order
SCREW TRILOBULAR – Part Number: WB01K10110
SCREW TRILOBULAR
PartSelect #: PS8688063
Manufacturer #: WB01K10110
$10.29
  Special Order
OVEN RACK – Part Number: WB48X21508
OVEN RACK
PartSelect #: PS8768340
Manufacturer #: WB48X21508
Sold individually.
$92.11
  Special Order
Liquid Propane Orifice Spud – Part Number: WB28K10023
Liquid Propane Orifice Spud
PartSelect #: PS240683
Manufacturer #: WB28K10023
This orifice spud changes the burner from natural gas to liquid propane. This orifice is sold individually. Size: .89MM
$11.80
  Special Order
Central Burner Cap - Black – Part Number: WB29K10045
Central Burner Cap - Black
PartSelect #: PS3503824
Manufacturer #: WB29K10045
$149.46
  Special Order
Outer Burner Cap – Part Number: WB29K10044
Outer Burner Cap
PartSelect #: PS3503823
Manufacturer #: WB29K10044
$146.95
  Special Order
REVERSIBLE GRIDDLE – Part Number: WB31X24998
REVERSIBLE GRIDDLE
★★★★★
★★★★★
(1)
PartSelect #: PS11726689
Manufacturer #: WB31X24998
$258.07
  Special Order
NUT – Part Number: WB02T10017
NUT
PartSelect #: PS223451
Manufacturer #: WB02T10017
$12.35
  Special Order
Back to Top
View More

Questions And Answers for PGB980ZEJ2SS

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the PGB980ZEJ2SS

[Viewing 2 of 2]
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the LEG LEVELER

Replacing the LEG LEVELER

Back to Top
View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven Lamp Holder Burned
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
Parts Used:
Oven Light Housing
  • Jack from Okmulgee, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
23 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grate to replace griddle
Remove griddle insert grate
Parts Used:
CENTRAL GRATE
  • Barbara from LOUISVILLE, KY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original burner cap was chipping; must have been dropped somewhere along the line.
New burner cap replaced old; just placed over burner; no tools required.

One suggestion: burner cap should have been shipped with thicker bubble protection (easy to do). It was minimally wrapped and placed in a thin, bubble envelope, risking damage in shipping process. Luckily, the burner arrived in tact and usable.
Parts Used:
Burner Cap - 15K
  • Mitzi from Briarcliff Manor, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More