This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
The lower spray arm is mounted to the bottom of your dishwasher tub, and it rotates and sprays water to clean the dishes in the lower dish rack. This spray arm is made of gray plastic, and is approxim...
The circulation pump adapter, or pump adapter assembly connects the circulation pump to the tub of your dishwasher. If your dishwasher is leaking around this adapter, check the connection to ensure ev...
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
This is a handle actuator for your dishwasher. It is made of black plastic, and is sold individually. The handle actuator is found in the control panel, and it releases the door latch when you lift th...
This part is the replacement door hinge cable for your dishwasher. The door hinge cable connects the door spring to the door hinge, and allows the door to open in a controlled fashion. If you open you...
This gasket lines the inside cabinet in the dishwasher.
$99.16
Special Order
Questions And Answers for PDW8680N00SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Becky
December 12, 2023
Push button to start won't connect. What part do I need
For model number PDW8680N00SS
Hello Becky, thank you for reaching out. Based on our understanding of the issue, you may need to replace the control panel assembly, part number PS1482004, to fix the issue. Glad to be of assistance!
Water is suddenly not entering dishwasher on a new cycle. The GE Profile is 15 years old and performed well up to now. Water supply is working as it should. What do you recommend?
Thanks.
For model number PDW8680N00SS
Hi Kevin, thank you for reaching out. We would recommend checking the water inlet valve first. If it is fine, the issue could be with the float switch assembly, part number PS958959. It shuts the water fill valve off if the water level gets too high before the timed fill cycle ends. You may need to replace it to fix the issue. We hope this sorts out your problem!
When the dishwasher is running, water spays and leaks out of the side of the door. I believe it needs a new door seal (gasket).
For model number PDW8680N00SS
Hi Chris, thank you for reaching out. Based on the description, we have concluded that you probably have a damaged tub seal, part number PS958888. It creates a watertight seal between the dishwasher tub and door. You may need to replace the gasket to fix the issue. We hope this helps, good luck with this repair!
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts.
Pull old rack out, slip new one in! One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces.
