This is replacement door latch for your dishwasher. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwasher door closed during operation. If you have a bro...
This is a genuine GE dishwasher leveling screw. It operates as a leg on the bottom of your dishwasher, and can be screwed in and out to raise and lower the height of the dishwasher. It is made of meta...
This is a lower rack roller for your dishwasher. It attaches in the lower roller assembly on the bottom of your rack to allow the rack to smoothly slide in and out. This replacement part is 1.5 inches...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cindee
December 16, 2019
Has no power. Told by service man needs motherboard and i can’t find pss as it number
For model number PDT845SMJ0ES
Good Day Cindee. Thank you for your question in regards to your unit (Model Number PDT845SMJ0ES). Based on our research the PartSelect number for the part that is compatible with your unit is PS12342774. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeff
April 9, 2023
Making a lot of noise. Sound like the sprayer arm is out of balance. As it is a vibration kind of noise. Do I need to replace the arm or is it the motor?
For model number PDT845SMJ0ES
Hi Jeff, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the washer arms for any obstruction first. If a handle or utensil is sticking through one of the racks, the wash arm may be hitting it as it turns. Or there may be an item that is too tall and obstructs the upper wash arm. Confirm that nothing is obstructing the upper or lower wash arms. If that is not causing the issue, then you may need to check the wash pump, part number PS12730515. The wash pump motor has bearings that wear out over time. When the motor bearings fail, they generate a continuous noise. If the motor bearings have failed, you may need to replace the entire wash pump kit. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Deana
June 27, 2023
The start button does not work. What part do we need?
For model number PDT845SMJ0ES
Hello Deana, thank you for reaching out. The issue is most likely with the start button. We recommend you replace the button and graphic assembly, part number PS11762922. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
1. Turn off breaker supplying power to dishwasher in electrical panel 2. Open dishwasher door 3. Unscrew the screws that secure the dishwasher to the counter. 4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch. 5. On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside. 6. Remove old door latch. 7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in. 8. Plug wire harness into new door latch. 9. Re-align dishwasher and re-secure to counter in previous position. 10. Test latch to make sure it closes properly. 11. Turn on breaker in electrical panel. The dishwasher should now function properly.
I watched a step by step video provided on the Fix It app. Easy to follow directions and only took minutes to tear apart and put back together. Didn't even require help from my husband. Although the latch and striker were not the problem, contacted parts select and they then recommended the electronic control board, they ordered it, had it shipped to me within a few days, another really easy fix I did using the You tube video. Fixed the problem lickety-split. I will never go without my fix it app. Entered all my appliances. Sure beats spending hundreds on appliance repairmen! Thank you Parts Select!
the design of this part is easy to break when closing the top rack.
there is a hub that clicks in place and a spinner within this that makes the water spray evenly on the top of the tub of the dishwasher
the part broke when closing the rack [a dish too tall hit it]
it took less than 5 minutes to replace as the part just clicks into two edge spots i did this without removing the rack or even looking into the tub all by feel
