This dishwasher door latch and switch assembly is a critical component for GE dishwashers, ensuring the door seals tightly to prevent leaks and enabling the appliance to operate correctly. Built to OE...
This tub gasket creates a secure, leak-proof seal around the dishwasher tub, preventing water from escaping and ensuring the door closes properly for efficient operation. Designed for durability and a...
This upper spray arm assembly is a rotating wash arm that helps deliver strong, even water coverage inside the dishwasher to thoroughly clean dishes on the upper rack. Designed to match the original f...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cindy
December 13, 2023
What does the error code IH45 mean. It is not in the manual. I have looked it up on line and can't find it.
For model number PDT660SSF1SS
Hi Cindy,
Thank you for your question. If the dishwasher displays 1H, it is programmed for a delayed start. Pressing the cancel button will clear the code from the display. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Milan
December 10, 2019
Does my model have an air gap?What does e8 code mean?
For model number PDT660SSF1SS
Hello Milan, thank you for your question. That error code is indicating there is an issue with the pressure switch. Unfortunately, that part has been discontinued by the manufacturer an is no longer available. For more information please contact the manufacturer directly. I hope this helps!
Was this helpful?
Thank you for voting!
Travis
January 10, 2020
Have a flashing ed and have reset power but will not go away can't seem to find what this code is anywhere.
For model number PDT660SSF1SS
Hi Travis. We do not have any references to an ED code. I would suggest contacting the manufacturer directly for assistance. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Paul
February 21, 2024
I have a E4 error code that won't clear. I've tried cycling the power but it just flashes the code.
For model number PDT660SSF1SS
Hello Paul, thank you for your inquiry. Based on our research, the error code E4 indicates that there is an issue with the overflow sensor. We would recommend replacing the overflow switch, part number PS12301601, to solve the problem. We hope this helps!
I have an error code E8. The dishes seem to have gone through the full wash cycle but I can’t get rid of the error code. Thanks!
For model number PDT660SSF1SS
Hi Dulice,
Thank you for your question. The E8 error code indicates that the dishwasher is experiencing a water delivery error. Check the water lines to make sure they are positioned correctly and that there are no clogs or kinks in them. You should also check the screens on the water inlet valve to see if they have sediment on them. If they do gently clean them with a fine brush and do not use too much force because if they become damaged, you will need to replace the water inlet valve. If theses items are fine, then visually inspect the water inlet valve for signs of damage, wear, or cracking. If your valve shows signs of any of the symptoms described above, you will need a replacement water inlet valve. We hope this helps!
