PC5010CX1 Makita Cement Mixer - Overview

This power cord is for power tools. Unplug the power tool before installing this part. Wear work gloves to protect your hands.

This part is made of metal and is available individually. A wrench may be required to replace this part if it becomes broken or stripped. The hex nut fits between the drive gear and the gear housing. This is an authentic Makita replacement part that is sourced from the original manufacturer for use with angle grinders.

This authentic manufacturer-sourced replacement flat washer which is specially designed for use with Makita power tools. It is a standard hardware which has multiple applications depending on the model of your equipment, please make sure to check the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

This is a genuine Makita part sourced directly from the manufacturer for use in drills, grinders, impact drivers, impact wrenches, jointers, saws, planers, rotary hammers, sanders, and shears. The flat washer goes next to the vice plate and is made of metal. A screwdriver may be necessary during the installation of this item. It may becom...Read moree broken and will need to be replaced. This is available as an individual replacement part.

This is an authentic replacement part manufactured for Makita products. This metal washer has many applications usually used as a spacer for bearings. This washer is sold individually, please see model diagram for part location or additional parts.

This is a genuine Makita replacement part that has been OEM sourced to ensure quality. The self-locking clip is intended to be used with laminate trimmers, angle grinders, jig saws, wet stone polishers, routers, and multi-tools. This item is used to secure a part assembly along a shaft. The application of the self-lock can vary based on t...Read morehe model of your equipment. It is recommended to review your model's part diagram to verify this part's compatibility and usage.

This manufacturer sourced replacement pin is made out rubber and it is sold individually. It acts as a cushion/spacer in a variety of Makita power tools. This is a standard piece of hardware and it has multiple applications based on your tool. Please refer to diagrams for correct application.

This is an original Makita replacement part. The screw is found in angle grinders. This part is made of metal, and is generally used to secure the wheel cover assembly into place. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this item. This part is sold individually.

The head bolt attaches to the bearing box. This part is available individually and is made of metal. An allen wrench will be needed during the installation process. It will require replacing if it breaks. This is a genuine replacement part sourced from the original manufacturer for use with Makita angle grinders.

This is an authentic Makita replacement part that is sourced from the original manufacturer for use with grinders, impact drivers, die grinders, chainsaws, and impact wrenches. The tapping screw is used with several different types of tools and the application of the screw can vary based on the model of equipment. The screw is sold as an individual replacement part.