PAFCTV660V (Type 2) DeVilbiss Compressor - Overview

Sections of the PAFCTV660V

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Shroud Rear Twin Cyl – Part Number: DAC-243
Shroud Rear Twin Cyl
PartSelect #: PS10116053
Manufacturer #: DAC-243
  No Longer Available
Shroud Front Twin Cy – Part Number: DAC-244
Shroud Front Twin Cy
PartSelect #: PS10116054
Manufacturer #: DAC-244
  No Longer Available
Gauge 300 PSI Back M – Part Number: GA-360-B
Gauge 300 PSI Back M
PartSelect #: PS10116088
Manufacturer #: GA-360-B
  No Longer Available
Washer Align – Part Number: ACG-9
Washer Align
PartSelect #: PS10115703
Manufacturer #: ACG-9
  No Longer Available
Cover Intake Muffler – Part Number: ACG-13
Cover Intake Muffler
PartSelect #: PS10115697
Manufacturer #: ACG-13
  No Longer Available
Counterbalance Inner – Part Number: ACG-6
Counterbalance Inner
PartSelect #: PS10115700
Manufacturer #: ACG-6
  No Longer Available
Nut .500-20 UNF-2A H – Part Number: ACG-23
Nut .500-20 UNF-2A H
PartSelect #: PS10115699
Manufacturer #: ACG-23
  No Longer Available
Pin Eccentric – Part Number: ACG-8
Pin Eccentric
PartSelect #: PS10115702
Manufacturer #: ACG-8
  No Longer Available
CONNECTOR BODY – Part Number: 5140142-73
CONNECTOR BODY
PartSelect #: PS12467971
Manufacturer #: 5140142-73
$20.11
  Special Order
ISOLATOR 3 POINT MOU – Part Number: ACG-19
ISOLATOR 3 POINT MOU
PartSelect #: PS12467390
Manufacturer #: ACG-19
$5.95
  Special Order
SCREW .250-20X1.25 U – Part Number: SSF-990
SCREW .250-20X1.25 U
PartSelect #: PS12509484
Manufacturer #: SSF-990
$12.20
  Special Order
Nipple .375 NPT X 1. – Part Number: SS-2072-1
Nipple .375 NPT X 1.
PartSelect #: PS10050595
Manufacturer #: SS-2072-1
  No Longer Available

Questions And Answers for PAFCTV660V

Be the first to ask our experts a question about this model!

Common Symptoms of the PAFCTV660V

[Viewing 2 of 2]
No compressed air
Fixed by
these parts
Fixing Fixing
Show All
Air leak
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The air was bypassing the compressor gaskets and cylinder wall was worn out
1 remove cover
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on the head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws
Parts Used:
KIT COMP RING REPLAC
  • Charles from GARRISON, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
18 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!