P6C Bostitch Nailer - Overview

It is a genuine item that is supplied directly from the original equipment manufacturer for Bostitch pneumatic stapling pliers. This is an identical replacement for a missing or faulty clincher arm spring that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct locati...Read moreon and application of this component. Keep in mind this high-quality item is made of durable metal and is sold individually.

This authentic component is an OEM part which is designed for Bostitch pneumatic stapling pliers. It helps to apply tension on the staples in the magazine. This is a high-quality replacement for a damaged or a missing hardware that was installed on a new unit. Keep in mind this high-quality magazine spring is made of durable metal and is ...Read moresold as an individual component. Check the appropriate diagrams for your model for the exact location and the correct installation of this item. Replacing it is a simple task that may only require pliers.

This part is an OEM from Bostitch. The P6 magazine cover is designed for use with several stapling plier devices. The metal component is secured to the stapler pusher in the magazine assembly, holding the staples in the magazine. This part is sold individually. A hex key and a screwdriver may help in the repair.

This part is an OEM from Bostitch. Compatible with several stapling pliers, the retaining core case ring is sold individually. The metal ring helps to secure the bushing and pin. A pair of needle nose pliers are required for the proper installation.

This 2619 driver is an original part from Bostitch. The metal component is made for use with the P6C Pneumatic Plier/Stapler. The protective driver is fastened onto the nose of the plier, guiding the staples. A flat head screwdriver and needle nose pliers are often needed for the repair. The 2619 driver is sold individually.

This driver is a genuine OEM replacement part that is responsible for initiating the stapling or nailing action in pliers. It is a 1-inch-long metal pin, found on the nose of the equipment that applies pressure to the fasteners being installed to ensure a secure hold. If the driver fails, the pliers will be unable to fasten materials prop...Read moreerly, resulting in inefficient stapling or nailing operations. To replace the driver, remove the equipment cover and carefully pull the old driver out. Position the new driver in its place and return the equipment cover to complete the repair.