P1102 (107179002) Ryobi Lawn Mower - Overview

Uneven cutting or excessive deck vibration may indicate a cracked, distorted, or damaged blade adapter. The holder supports the blade on the motor shaft and maintains alignment during operation. First check that the blade is balanced, the retaining hardware is tight, and the shaft is not bent. Match the replacement to the full mower model...Read more because mounting profiles can differ. Disconnect every power source before reaching beneath the deck and handle the blade carefully. Install all washers and spacers in their original order, then verify that the blade sits flat and rotates without interference.

Reliable cutting-height changes depend on the wheel bracket and adjustment parts moving together correctly. Damage, rust, or loose mounting points can cause the deck to sit unevenly or drop from its chosen setting. Inspect nearby hardware and wheel parts before replacing the bracket. Match the new part to the full mower model, serial numb...Read moreer, and parts diagram. Shut off the mower, remove its battery or disconnect the spark plug wire, wear gloves, and keep hands away from the blade while working.