This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, you...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anita
December 26, 2019
Move shakes alot
For model number NTW4651BQ1
Hello Anita, thank you for your inquiry. If your model NTW4651BQ1 moves and shakes a lot, we recommend replacing the Suspension Rod Support. For your model, the correct replacement is part number PS3502189. I hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Janice
December 16, 2019
Is it normal to hear sloshing sound if i move the agitator? Is there liquid in the balancing ring?
For model number NTW4651BQ1
Good Day Janice. Thank you for your question in regards to your unit (Model Number NTW4651BQ1). We do apologize but we were not able to locate the information you requested. For more specialized assistance or to speak with someone about this, we recommend calling the manufacturer of the equipment directly. They can be reached at by phone by calling 866-616-2664. Best Regards.
Was this helpful?
Thank you for voting!
Natalie
November 12, 2019
Makes occasional grinding noise sometimes won’t agitate or spin out- then will turn around and work perfectly for the next load. I know i’ve got something going out can you point me in the right direction?
For model number NTW4651BQ1
Hello Natalie and thanks for writing.
Sound very much like the drive pulley #PS10057144 or the belt # PS11747978 itself are worn and ready to give up. Check these parts and replace them if needed.
Don t forget to change the washer # PS11742027. We hope this helps. Please contact us at any time
Can a fabric softener dispenser be added to this washer. The agitator does not have any holes for the fabric softener to come out of. I had ordered a dispenser but it did not work. Do you have to have a different agitator on order to add a dispenser? Please advise
Thank you
For model number NTW4651BQ1
Hello Barbara, thank you for your question. Unfortunately, your model does not have a fabric softener dispenser or the option to change agitators. We hope this helps.
Was this helpful?
Thank you for voting!
Scott
March 7, 2023
Water underneath my washing machine
For model number NTW4651BQ1
Hi Scott, thank you for reaching out. According to our research, you may need to check the following parts to fix this issue: tub seal, part number PS3407958, drain hose, part number PS12578897, and water inlet and valve assembly, part number PS11757114. We hope this information is helpful!
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses.
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
