This thermal cut-off kit for a dryer includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires.
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This high-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit, this piece will shu...
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
$27.02
In Stock
Questions And Answers for NED5100TQ1
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Luis
April 23, 2023
I CAN HEAR THE DRYER MOTOR ENGAGE BUT THE DRYER BASKET DOES NOT TURN DRYER VIBRATES. WAHT CAN IT BE? THE BELT DOESN'T APPEAR TO BE DAMAGED NEITHER THE IDLER PULLEY.
For model number NED5100TQ1
Hello Luis, thank you for your inquiry. We have found that the rollers, part number PS347627, must spin freely to work properly. If the drum rollers are worn out, the dryer won’t turn. Replacing the rollers can fix this problem. We hope this helps, good luck with the repair!
MY DRYER WILL NOT DRY CLOTHES ALL THE WAY. IT SPENDS BUT IT IS LETTING OUT STEAM INSTEAD OF DRY HEAT. THERE IS CONDENSATION AND PIECES OF LINT ON THE INSIDE OF THE DOOR. WHAT IS CAUSING THIS? CAN THIS BE FIXED?
For model number NED5100TQ1
Hi Addie, thank you for asking. Based on our understanding of the issue, we would suggest cleaning the lint filter and exhaust vent properly, and if the issue still exists, you may need to replace the blower wheel, part number PS11743785, to solve the problem. It attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent. We hope this sorts out your problem!
When pushing start button buzz sound occurs and nothing else.
For model number NED5100TQ1
Hi Mike, thank you for your question! First, make sure something is not stuck in the blower. If it is fine, then we would recommend replacing the motor, part number PS334304. We hope this sorts out your problem!
Hello Dianna, thank you for contacting us. If you are looking for a heating element for your dryer, the heating element, part number PS334313, is a good fit for your model. The heating element generates the dryer's heat. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
I think I need a switch to control the length of a cycle. A loud buzzer goes off and will not turn off until the dryer is opened. Can you help?
For model number NED5100TQ1
Hi Tonya, thank you for your question. Based on the description that you have provided, we would recommend that you replace the timer, part number PS11749827. Before replacing the timer, you may need to check the cycling thermostat, part number PS11741405. We hope this information helps!
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off.
I ordered all the thermal sensors for the dryer. They arrived two days later and they were the correct parts. It took me about 1/2 hour to replace all three sensors and now the dryer works like new again. My wife was very pleased, so was I.
I basically took the back offo the drive, then detach the heating coil. Afterwards had to go back in and change the thermal regulator an the job was completed.