This heating element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current, causing the wire to heat up. The heat produced is...
This thermal cut-off kit for a dryer includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires.
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This high-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit, this piece will shu...
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
This seals Includes adhesive. This part helps seal the drum to prevent hot air from escaping.
$82.23
In Stock
Questions And Answers for NED4655EW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
60 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
February 25, 2020
Timer will not advance while dryer is running and therefore, dryer will not shut off when clothes are finished drying.
For model number NED4655EW1
Hello Gary, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11773247 for the Timer Switch that will need to be replaced. We hope this helps.
Hello and thank you for writing.
For your convenience, we have attached the link to your service manual. We hope this helps. Good luck with your repair.
http://laundry.manualsonline.com/manuals/mfg/amana/amana_clothes_dryer_product_list.html
9 people found this helpful.
Was this helpful?
Thank you for voting!
Artur
November 30, 2021
Hi, dryer, no heat, checked the heating element it's good. Please advise. Thank you in advance.
For model number NED4655EW1
Hello Artur, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first part to check in this case would be all your thermostats and thermal fuses. Cycling thermostat, part number PS11741405, Thermal Cut-Off Kit, part number PS334299, Dryer High Limit Thermostat, part number PS11742185, and the Thermal Fuse, part number PS11741460. You can test those parts with a multi meter, and they should be reading 0 ohms to be working correctly. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. We hope that helps. Good luck with your repair.
Dryer making noise like something caught. Trouble shooting says check between drum and front or rear of dryer. How do i do that
For model number NED4655EW1
Hi Billie, thank you for your question. We do have a video listed here: https://youtu.be/LxooXQCin8Y, that will show you how to open up your dryer so you can take a look. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Martin
June 14, 2021
Timer will not advance, dryer keeps running and will not stop unless I stop it manually.
For model number NED4655EW1
Hello Martin, Thank you for the question. If the dryer continues to run after the cycle ends, the Timer Switch will need to be replaced. We hope this helps, good luck with this repair!
To reach the heating element you only need to open the back cover of the dryer (about 8 nut-head screws). Remember to disconnect the power.
To remove the heating element there are two small nut-head screws. Remove the two electric wires. Then you can pull the heating element away.
You can check the heating element with an ohm-meter or visually inspect it to see if the heating element spiral wire is broken.
Don't hurry to dispose the old element. My model includes a small electric safety part. You'll need to transfer it to the new heating element (that comes without it)..
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off.
The repair was easy. the most time consuming part was vacuuming the dust from the back of the Dryer, The repair required removing screw from the back panel of the dryer. Then removing screws from the heating element and unplugging the wires. The only moderately diffculy part was swapping the sensor form the old element.