NE58F9710WS (AC-0005) Samsung Microwave Oven Combo - Overview

Diagrams for NE58F9710WS

See every part. Know exactly what you need.

Parts for the NE58F9710WS

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Surface Element Switch – Part Number: DG44-01009A
$119.98
In Stock
Surface Element Switch
Part #DG44-01009A
Range Convection Fan Motor Assembly – Part Number: DG96-00110E
$136.36
On Order
Range Convection Fan Motor Assembly
Part #DG96-00110E
This convection fan motor assembly is designed to circulate hot air throughout the oven cavity, promoting even heat distribution for more consistent baking and roasting results. By keeping air moving during convection cooking, it helps eliminate hot spots and improves overall cooking performance. Replacement is often needed if the oven fan becomes loud, stops spinning, or causes uneven cooking temperatures. Supplied as a complete motor and fan assembly, this component offers a reliable solution for restoring quiet operation and efficient convection airflow when the original fan motor is worn or damaged.
Read less
Thermostat – Part Number: DE47-20037A
$26.33
In Stock
Thermostat
Part #DE47-20037A
This high-limit thermostat (part number DE47-20037A) is for ranges. High-limit thermostat DE47-20037A trips when the oven overheats. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Display Board – Part Number: DE96-01027A
$369.14
On Order
Convection Reverse Fan Motor - 120V 60Hz – Part Number: DG96-00110B
$187.29
In Stock
Oven Temperature Sensor – Part Number: DG32-00004C
$128.52
In Stock
Oven Temperature Sensor
Part #DG32-00004C
This oven temperature sensor monitors the temperature inside the oven and sends that information to the control board, helping maintain accurate and consistent cooking temperatures. It plays an important role in proper oven operation and helps ensure food cooks evenly. If the oven is overheating, not heating properly, displaying temperature-related error codes, or producing inconsistent cooking results, a faulty temperature sensor may be the cause. Replacing the sensor can help restore accurate temperature control and reliable oven performance. Before replacing the sensor, testing it with an ohm meter can help confirm whether it is defective.
Read less
Lower Fan Blade – Part Number: DG67-00011B
$18.59
In Stock
Lower Fan Blade
Part #DG67-00011B
This convection fan blade (part number DG67-00011B) is for ranges. Convection fan blade DG67-00011B spins on the motor shaft to circulate hot air through the oven for even heating. Unplug the range or shut off the house circuit breaker before installing this part. Wear work gloves to protect your hands.
Micro Door Switch – Part Number: 3405-001034
$19.32
In Stock
Range Main Top – Part Number: DG94-00889A
$388.24
On Order
Range Main Top
Part #DG94-00889A
This main top is for ranges. It provides a stable cooking surface and houses the surface cooking burners.
Convection Fan Motor – Part Number: DG31-00005A
$181.83
In Stock
Convection Fan Motor
Part #DG31-00005A
The fan motor helps rotate the upper fan blade to circulate the hot air though the oven cavity for even heating. This motor is reverse threaded.
Range Triple Radiant Element – Part Number: DG47-00065A
$278.57
In Stock
Range Triple Radiant Element
Part #DG47-00065A
The Radiant element supplies the heat to a cooking area on top of the range.
Upper Fan Blade – Part Number: DG67-00001B
$19.32
In Stock
Upper Fan Blade
Part #DG67-00001B
View More

Common Symptoms of the NE58F9710WS

How this model fails, and the parts that fix it.

No heat
Fixed by
these parts
Fixing
Show All
Doesn’t shut off
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
Fixing
Show All

Videos related to the NE58F9710WS

Watch our pros, then fix it yourself.

Replacing the Range Convection Fan Motor Assembly

Replacing the Range Convection Fan Motor Assembly

View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven shut off during self clean cycle and door stayed locked.
23 of 51 people found this instruction helpful.
  • Uwe from FORT COLLINS, CO
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Was this helpful?
Thank you for voting!
The microwave would not turn on or would run with the door open
6 of 13 people found this instruction helpful.
  • Raymond from TROY, OH
  • Easy
  • 1- 2 hours
  • Screw drivers
Other tools that are usefull long needle nose pliers, long thin blade screw driver and small magnetic flashlight. Place the microwave on a work bench and remove the case it cover 3 sides. Place the microwave on a chair so it can stand with the controls up. You are replacing the lower door microswitch. The switch is located behind the control panel in the lower part of the area. The switch is several inches inside this area and your hands will not fit. Take care when moving wires and a couple of sensors. Use the thin blade screwdriver to release a tab holding the switch in place. Do not break this tab. Take the needle nose pliers and remove the switch. Put the wires on the new switch, open the door a short distance so a door lever moves enough to put the microswitch back into the bracket.
Read less
Was this helpful?
Thank you for voting!
Fan motor was making a loud noise .
3 of 4 people found this instruction helpful.
  • frederick from PERRY, OH
  • Very Easy
  • Less than 15 mins
  • Screw drivers, Wrench (Adjustable)
Google search and found videos on YouTube explaining the noise and how to fix it.
Was this helpful?
Thank you for voting!
View More