NE58F9710WS (AA-02) Samsung Range - Overview

Diagrams for NE58F9710WS

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Triple Burner Switch – Part Number: DG44-01007B
$132.64
On Order
Burner Switch – Part Number: DG44-01006A
$140.59
In Stock
Surface Element Switch – Part Number: DG44-01009A
$119.98
In Stock
Surface Element Switch
Part #DG44-01009A
Range Convection Fan Motor Assembly – Part Number: DG96-00110E
$136.36
On Order
Range Convection Fan Motor Assembly
Part #DG96-00110E
This convection fan motor assembly is designed to circulate hot air throughout the oven cavity, promoting even heat distribution for more consistent baking and roasting results. By keeping air moving during convection cooking, it helps eliminate hot spots and improves overall cooking performance. Replacement is often needed if the oven fan becomes loud, stops spinning, or causes uneven cooking temperatures. Supplied as a complete motor and fan assembly, this component offers a reliable solution for restoring quiet operation and efficient convection airflow when the original fan motor is worn or damaged.
Leveling Leg – Part Number: DG61-00525A
$29.88
In Stock
Leveling Leg
Part #DG61-00525A
Thermostat – Part Number: DE47-20037A
$26.33
In Stock
Thermostat
Part #DE47-20037A
This high-limit thermostat (part number DE47-20037A) is for ranges. High-limit thermostat DE47-20037A trips when the oven overheats. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Display Board – Part Number: DE96-01027A
$369.14
On Order
Surface Element Control Switch – Part Number: DG44-01005B
$174.03
In Stock
Convection Reverse Fan Motor - 120V 60Hz – Part Number: DG96-00110B
$187.29
In Stock
Oven Temperature Sensor – Part Number: DG32-00004C
$128.52
In Stock
Oven Temperature Sensor
Part #DG32-00004C
This oven temperature sensor monitors the temperature inside the oven and sends that information to the control board, helping maintain accurate and consistent cooking temperatures. It plays an important role in proper oven operation and helps ensure food cooks evenly. If the oven is overheating, not heating properly, displaying temperature-related error codes, or producing inconsistent cooking results, a faulty temperature sensor may be the cause. Replacing the sensor can help restore accurate temperature control and reliable oven performance. Before replacing the sensor, testing it with an ohm meter can help confirm whether it is defective.
Lower Fan Blade – Part Number: DG67-00011B
$18.59
In Stock
Lower Fan Blade
Part #DG67-00011B
This convection fan blade (part number DG67-00011B) is for ranges. Convection fan blade DG67-00011B spins on the motor shaft to circulate hot air through the oven for even heating. Unplug the range or shut off the house circuit breaker before installing this part. Wear work gloves to protect your hands.
Micro Door Switch – Part Number: 3405-001034
$19.32
In Stock

Common Symptoms of the NE58F9710WS

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The triple burner switch would only stay on the highest setting.
17 of 18 people found this instruction helpful.
  • Jimmie D. from THOMPSON, MO
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I removed the control panel with a Phillips screwdriver and unplugged the burner switch and replaced the new switch and put the control panel back in place and turned on the burner and it worked as it should.i realized that I only would have only had to remove the 4 screws on the bottom of the control panel. All I would have had to do was just take those 4 screws out and remove the switch control knob and the two screws that held the switch in. Am very happy with the results
Was this helpful?
Thank you for voting!
When I turned on triple burner on any of the three burners it would immediately go to high mode
9 of 9 people found this instruction helpful.
  • David from NAVARRE, FL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Cool oven, open door. Turn off electrical power. I laid a cloth over door to protect and to catch ant screws that my fat fingers would drop. I removed 4 screws under control panel. I pulled panel up and off stove face. My wife held it safely as I removed the triple burner knob. I then placed new switch, on stove top in same position as ol d one. I then removed screws holding old knob to release from control panel. The removed electrical connections one at a time and installed on new switch. Reinstalled switch back in control panel. Reinstalled control panel. Placed knob back in place. Turned electrical power back on. Then tested burner. Wife is happy and so am I.
Was this helpful?
Thank you for voting!
Oven shut off during self clean cycle and door stayed locked.
23 of 51 people found this instruction helpful.
  • Uwe from FORT COLLINS, CO
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Was this helpful?
Thank you for voting!