NE58F9500SS (AA-01) Samsung Range - Overview

Diagrams for NE58F9500SS

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burner Switch – Part Number: DG44-01006A
$140.59
In Stock
Range Main Glass Cooktop Assembly – Part Number: DG94-00889B
$389.40
In Stock
Range Main Glass Cooktop Assembly
★★★★★
★★★★★
(2)
Part #DG94-00889B
This cooktop and frame assembly is a genuine OEM replacement part supplied by Samsung. It is specially made to fit with Samsung gas ranges. It includes a black frame made of stainless steel and a black glass cooktop. The glass cooktop sits on the countertop and the frame holds it in place. If your burners are not heating properly or the glass is cracked, you will need to replace the assembly in order to safely continue using your range.
Surface Element Switch – Part Number: DG44-01009A
$119.98
In Stock
Surface Element Switch
Part #DG44-01009A
Range Convection Fan Motor Assembly – Part Number: DG96-00110E
$136.36
On Order
Range Convection Fan Motor Assembly
Part #DG96-00110E
This convection fan motor assembly is designed to circulate hot air throughout the oven cavity, promoting even heat distribution for more consistent baking and roasting results. By keeping air moving during convection cooking, it helps eliminate hot spots and improves overall cooking performance. Replacement is often needed if the oven fan becomes loud, stops spinning, or causes uneven cooking temperatures. Supplied as a complete motor and fan assembly, this component offers a reliable solution for restoring quiet operation and efficient convection airflow when the original fan motor is worn or damaged.
Leveling Leg – Part Number: DG61-00525A
$29.88
In Stock
Leveling Leg
Part #DG61-00525A
Thermostat – Part Number: DE47-20037A
$26.33
In Stock
Thermostat
Part #DE47-20037A
This high-limit thermostat (part number DE47-20037A) is for ranges. High-limit thermostat DE47-20037A trips when the oven overheats. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Display Board – Part Number: DE96-01027A
$369.14
On Order
Convection Reverse Fan Motor - 120V 60Hz – Part Number: DG96-00110B
$187.29
In Stock
HEATER RADIANT-DUAL;AC240V,9 Inch/12 Inch,1900W – Part Number: DG47-00064A
$221.57
In Stock
HEATER RADIANT-DUAL;AC240V,9 Inch/12 Inch,1900W
Part #DG47-00064A
This surface element is for ranges. Surface element supplies the heat to a cooking area on top of the range.
Oven Temperature Sensor – Part Number: DG32-00004C
$128.52
In Stock
Oven Temperature Sensor
Part #DG32-00004C
This oven temperature sensor monitors the temperature inside the oven and sends that information to the control board, helping maintain accurate and consistent cooking temperatures. It plays an important role in proper oven operation and helps ensure food cooks evenly. If the oven is overheating, not heating properly, displaying temperature-related error codes, or producing inconsistent cooking results, a faulty temperature sensor may be the cause. Replacing the sensor can help restore accurate temperature control and reliable oven performance. Before replacing the sensor, testing it with an ohm meter can help confirm whether it is defective.
Lower Fan Blade – Part Number: DG67-00011B
$18.59
In Stock
Lower Fan Blade
Part #DG67-00011B
This convection fan blade (part number DG67-00011B) is for ranges. Convection fan blade DG67-00011B spins on the motor shaft to circulate hot air through the oven for even heating. Unplug the range or shut off the house circuit breaker before installing this part. Wear work gloves to protect your hands.
Upper Fan Blade – Part Number: DG67-00001B
$19.32
In Stock
Upper Fan Blade
Part #DG67-00001B

Common Symptoms of the NE58F9500SS

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven shut off during self clean cycle and door stayed locked.
23 of 51 people found this instruction helpful.
  • Uwe from FORT COLLINS, CO
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Was this helpful?
Thank you for voting!
Slider Assembly in Oven Warming Drawer
1 of 2 people found this instruction helpful.
  • Judith from WASHINGTON, DC
  • Really Easy
  • 30 - 60 mins
Install handled by building engineer...thankfully. Did not take long for him, however, to install both sides of the drawer.
Was this helpful?
Thank you for voting!
Samsung oven was not heating properly. The oven baked at a lower heat (as much as 30 degrees) in the lower ranges of 350 to 450 degrees.
1 of 2 people found this instruction helpful.
  • Les from Tallahassee, FL
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
I had previously replaced the heating element and heat sensor to the range. The cost of replacing the thermostat was minimal. The key to replacing the thermostat is finding where it is located. Several videos describing the Samsung thermostat showed it housed under the top of the stove. This particular model places the thermostat at t he back of the range near the left side. After unplugging the range, and removing the back cover with a Phillips screwdriver, it was easy to locate the thermostat. After unplugging the existing one, and using a very small flathead screwdriver to gently pry the upper and lower clips holding it in place, installation of the new thermostat was a breeze. Removing and replacing did not take more than a couple of minutes. The oven is now heating properly at all temperature settings. I would recommend finding a schematic of the range showing the location of all the parts before beginning the repair.
Was this helpful?
Thank you for voting!