This cooktop and frame assembly is a genuine OEM replacement part supplied by Samsung. It is specially made to fit with Samsung gas ranges. It includes a black frame made of stainless steel and a black glass cooktop. The glass cooktop sits on the countertop and the frame holds it in place. If your burners are not heating properly or the g...Read morelass is cracked, you will need to replace the assembly in order to safely continue using your range.
This convection fan motor assembly is designed to circulate hot air throughout the oven cavity, promoting even heat distribution for more consistent baking and roasting results. By keeping air moving during convection cooking, it helps eliminate hot spots and improves overall cooking performance. Replacement is often needed if the oven fa...Read moren becomes loud, stops spinning, or causes uneven cooking temperatures. Supplied as a complete motor and fan assembly, this component offers a reliable solution for restoring quiet operation and efficient convection airflow when the original fan motor is worn or damaged.
This high-limit thermostat (part number DE47-20037A) is for ranges. High-limit thermostat DE47-20037A trips when the oven overheats. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
This oven temperature sensor monitors the temperature inside the oven and sends that information to the control board, helping maintain accurate and consistent cooking temperatures. It plays an important role in proper oven operation and helps ensure food cooks evenly. If the oven is overheating, not heating properly, displaying temperatu...Read morere-related error codes, or producing inconsistent cooking results, a faulty temperature sensor may be the cause. Replacing the sensor can help restore accurate temperature control and reliable oven performance. Before replacing the sensor, testing it with an ohm meter can help confirm whether it is defective.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob - For model number NE58F9500SS
October 12, 2022
top front top burner when turned on goes to full power and cant turn it down (no adjustment)
Hi Bob, thank you for reaching out. According to our research on the model, the Burner Switch appears to be faulty and you may need to replace it with part number PS8764900. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
WHAT IS THE DIFFERENCE IN BETWEEN THE PARTS N0.
DG31-00007C AND DG96-00110B
OR THIS PART FIT ON MY MODEL AND WERE
Hi Eric, Thank you for reaching out. As seen in the pictures, the PartSelect #: PS4241514 as the triangular bracket attached and the PartSelect Number PS4240737 is just the motor. Both will fit the model number provided for the Lower Fan at the back of the oven. Good luck with the repair!
Hi, what is the right part number for the UPPER convection fan motor for my model.
thanks.
Hello Eric, Thank you for contacting us. Researching your model, we show the upper convection fan motor assembly as PS4241514, and the motor by itself as part# PS4240737. We hope this helps you.
Do you carry the glass top for this 5.8 ft slide in range /Samsung
Hi David, sadly the requested part is discontinued, however you can contact the manufacturer to see if they have a suggested replacement. If they can provide you with a part number feel free to contact us back to see if we have the part in stock. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Michel - For model number NE58F9500SS
February 17, 2022
Hello Mr.
my broil element comes red and stays on always and burns all, can you direct me to a solution.
Hello Michel, thank you for writing. The element staying on is a hazard and it should be replaced. The part number for the broil element is PartSelect Number PS8764904. Good luck with your repair.
Was this helpful?
Thank you for voting!
Prev
1
2
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Convection oven fans were noisy.
17 of 27 peoplefound this instruction helpful.
Sue from De Soto, IL
A Bit Difficult
30 - 60 mins
Screw drivers, Socket set
This oven has two fans that counter rotate. One spins clockwise, the other counterclockwise. Because of this, the motors and the fan blades are different. The schematic shows the counter clockwise rotating fan with a right hand threaded shaft/nut on the bottom and the clockwise motor and fan with the left hand nut on the top. My range
... Read more had the motors in the exact opposite orientation, but the fan blades on the motors as shown on the schematic. The incorrect assembly at the factory (I bought new in the box, so I know this is the first repair) meant that nether fan blade was turning the correct direction. So do yourself a favor, be sure you’re buying the right motor (clockwise or counterclockwise) and be sure you put the right fan blade on the right motor. The Samsung motor ending in F is the counterclockwise motor that has the right hand threaded shaft the clockwise motor with the left hand threaded shaft ends in E.
Oven shut off during self clean cycle and door stayed locked.
23 of 51 peoplefound this instruction helpful.
Uwe from FORT COLLINS, CO
Very Easy
15 - 30 mins
Screw drivers
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Was this helpful?
Thank you for voting!
Bearing went out on the fan
7 of 14 peoplefound this instruction helpful.
John from NASHVILLE, TN
Easy
30 - 60 mins
Screw drivers, Socket set
Slide out the stove. Unplug the electricity. Remove the back panel with a screwdriver. Then go inside the oven and remove the two Philips head screws holding the fan cover. Then remove the nut holding the fan. Note, it is a left handed nut, so turn it right to loosen it. Pull off the fan. Return to the back and remove the nut and two scr
... Read moreews that hold the fan. The fan slides right out. The only problem I had was that the electrical contacts on the new motor were wider than the original. I had to break the plastic so I could separate the wire leads, so that they would fit the new motor. Works like a charm. John
My Orders
