N89C Bostitch Nailer - Overview

Sections of the N89C

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
WASHER-RUBBER-7 – Part Number: 854004
WASHER-RUBBER-7
PartSelect #: PS12504759
Manufacturer #: 854004
This rubber replacement seal is designed for use with select pneumatic and coil-fed nailers, providing a tight and reliable seal at the nose of the tool. Its primary function is to prevent air leakage...
$7.44
  In Stock
Order within the next 9 hrs and your part ships today!
LABEL-SENSOR SMALL ( – Part Number: 120927
LABEL-SENSOR SMALL (
PartSelect #: PS12409659
Manufacturer #: 120927
  No Longer Available
Pawl,Feed,Machining,Hq – Part Number: 185961
Pawl,Feed,Machining,Hq
PartSelect #: PS10247109
Manufacturer #: 185961
  No Longer Available
CASTING, PLUNGER – Part Number: 108225
CASTING, PLUNGER
PartSelect #: PS18979645
Manufacturer #: 108225
  No Longer Available
SPRING, CONTACT ARM – Part Number: 116970
SPRING, CONTACT ARM
PartSelect #: PS18979744
Manufacturer #: 116970
  No Longer Available
ARM, LOWER CONTACT – Part Number: 163907
ARM, LOWER CONTACT
PartSelect #: PS18980065
Manufacturer #: 163907
  No Longer Available
COVER, CANISTER, N89C – Part Number: 163910-S
COVER, CANISTER, N89C
PartSelect #: PS18980067
Manufacturer #: 163910-S
  No Longer Available
COLLAR, SPRING – Part Number: 163895
COLLAR, SPRING
PartSelect #: PS18980055
Manufacturer #: 163895
  No Longer Available
STOP, FEED PISTON – Part Number: 163897
STOP, FEED PISTON
PartSelect #: PS18980057
Manufacturer #: 163897
  No Longer Available
SEAL, NOSE – Part Number: 163884
SEAL, NOSE
PartSelect #: PS18980052
Manufacturer #: 163884
  No Longer Available
PLATFORM, CANISTER, N8 – Part Number: 163892
PLATFORM, CANISTER, N8
PartSelect #: PS18980053
Manufacturer #: 163892
  No Longer Available
BUSHING, FLANGED ISOL – Part Number: 123859
BUSHING, FLANGED ISOL
PartSelect #: PS18979787
Manufacturer #: 123859
  No Longer Available
View More

Questions And Answers for N89C

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More