N89C-1P (Type 0) Bostitch Nailer - Overview

Sections of the N89C-1P

[Viewing 1 of 1]
Page A Diagram and Parts List for Type 0 Bostitch Nailer
Page A
Keep searches simple, eg. "belt" or "pump".
WASHER-RUBBER-7 – Part Number: 854004
WASHER-RUBBER-7
PartSelect #: PS12504759
Manufacturer #: 854004
This rubber replacement seal is designed for use with select pneumatic and coil-fed nailers, providing a tight and reliable seal at the nose of the tool. Its primary function is to prevent air leakage...
$5.95
  In Stock
Order within the next 4 hrs and your part ships today!
SCREW-SOC HD. CAP M5 – Part Number: MSC5080-20
SCREW-SOC HD. CAP M5
PartSelect #: PS12508345
Manufacturer #: MSC5080-20
$5.95
  Special Order
SPRING-FEED PISTON – Part Number: 163930
SPRING-FEED PISTON
PartSelect #: PS12413408
Manufacturer #: 163930
$5.95
  Special Order
O-RING, .362X.103 – Part Number: 88999
O-RING, .362X.103
PartSelect #: PS18987666
Manufacturer #: 88999
  No Longer Available
PIN-SPECIAL – Part Number: N80125
PIN-SPECIAL
PartSelect #: PS12529657
Manufacturer #: N80125
$7.58
  Special Order
SPRING,CMPRSN. – Part Number: 854013
SPRING,CMPRSN.
PartSelect #: PS12501932
Manufacturer #: 854013
This is an original Bostich replacement part. The compression spring is made of durable metal, and is compatible with many pneumatic nailers. The spring helps to secure the machining door with the doo...
$5.95
  In Stock
Order within the next 4 hrs and your part ships today!
LOCTITE – Part Number: 851385
LOCTITE
PartSelect #: PS12504750
Manufacturer #: 851385
$60.52
  Special Order
NUT-NYLON M3X.50 – Part Number: MHE3050-100
NUT-NYLON M3X.50
PartSelect #: PS12521246
Manufacturer #: MHE3050-100
This lock nut is sourced from original equipment manufacturer for use with Bostitch nailers and staplers. It is a high quality hardware that has multiple applications depending on your tool. Please ma...
$5.95
  In Stock
Order within the next 4 hrs and your part ships today!
WASHER.SPECIAL – Part Number: MPW6.2
WASHER.SPECIAL
PartSelect #: PS12522766
Manufacturer #: MPW6.2
This is an original Bostitch replacement part manufactured for use with pneumatic nailers. Washers are used to disperse pressure from a nut or bolt across a wider surface area against a part assembly....
$5.95
  Special Order
KIT-TRIGGER VALVE – Part Number: TVA6
KIT-TRIGGER VALVE
PartSelect #: PS12531525
Manufacturer #: TVA6
Restore your tool’s performance with this complete trigger valve repair kit for brad nailers and staplers. If your tool is leaking air or frequently misfiring, replacing the trigger valve may solve th...
$70.33
  In Stock
Order within the next 4 hrs and your part ships today!
SCREW-SOC. HD. CAP M – Part Number: MSC6100-40
SCREW-SOC. HD. CAP M
PartSelect #: PS12525376
Manufacturer #: MSC6100-40
$5.95
  Special Order
SCREW-SHCS-M4X0.7X16 – Part Number: MSC4070-16
SCREW-SHCS-M4X0.7X16
PartSelect #: PS12478636
Manufacturer #: MSC4070-16
This replacement screw is a high quality item that has multiple uses depending on the model of your tool, please make sure to check appropriate diagrams for correct location and use of this hardware. ...
$5.95
  Special Order
Back to Top
View More

Questions And Answers for N89C-1P

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More