My Orders
N70CBPAL Bostitch Nailer - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$7.44
In Stock
WASHER-RUBBER-7
Part #854004
This rubber replacement seal is designed for use with select pneumatic and coil-fed nailers, providing a tight and reliable seal at the nose of the tool. Its primary function is to prevent air leakage during operation, helping to maintain consistent pressure and performance. Over time, seals can wear down or become damaged, which may lead...Read more to reduced efficiency or tool malfunction. This part is sold individually and is ideal for routine maintenance or repair. Replacing a worn nose seal can help extend the life of your tool and ensure smooth, dependable operation.
Read less
No Longer Available
Guide,Driver
Part #105033
$7.44
Special Order
SPRING-COMPRESSION
Part #101256
This genuine item is supplied by the original equipment manufacturer for use with Bostitch nailers. The compression spring fits between the piston stop and the o-ring. You may need an allen wrench when replacing this part. It is made of metal and will require replacing if it becomes bent or broken. This is available as an individual replacement part.
$33.20
Special Order
COVER-EXHAUST
Part #102506
This is an original Bostitch replacement part. The exhaust cover is commonly used in Bostitch nailers. This part is made of plastic and is used to cover the exhaust cap and direct the air. You will require a hex or Allen wrench to replace this part. This item is sold individually.
$7.44
In Stock
O-RING-2.48X.115
Part #101236
This is an authentic manufacturer-sourced replacement o-ring which is specially designed for use with Bostitch pneumatic nailers. It helps to provide an air-tight seal for the cylinder, make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is made of high-quality rubber ...Read moreand is sold individually, over time material may wear out and begin to crack eventually requiring a replacement.
Read less
$72.05
Special Order
HEAD VALVE
Part #104059
This is a genuine Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The durable plastic head valve fits over the cylinder and is used to allow air into the cylinder when the nail is fired. This item is sold as an individual replacement part.
$14.65
In Stock
FRAME/CAP GASKET
Part #9R199852
This high-quality replacement gasket is designed for use with pneumatic nailers and serves a crucial role in maintaining a secure seal between the end cap and the tool’s main frame. Proper sealing helps ensure consistent air pressure and optimal tool performance. Over time, gaskets can wear out or become damaged, leading to air leaks or r...Read moreeduced efficiency. This gasket is sold individually and is easy to install using a hex driver. Whether you're performing routine maintenance or addressing a specific issue, replacing a worn gasket can help extend the life of your tool and restore its full functionality.
Read less
$11.09
In Stock
O-RING-1.689X.190
Part #851439
This replacement O-ring is designed to help maintain proper air pressure in pneumatic tools by forming a flexible, airtight seal between rigid components. It is commonly used across various models of nailers, though the size and shape may vary depending on the specific tool. O-rings are essential for preventing air leaks and ensuring cons...Read moreistent performance. Over time, they can wear out, crack, or lose elasticity, making replacement necessary for optimal operation. This O-ring is sold individually, so be sure to verify compatibility with your tool before installation to ensure a proper fit and seal.
Read less
$7.44
Special Order
C-RING
Part #9R184453
$7.44
In Stock
PIN SPRING
Part #MPG030012
This is an authentic OEM part. The spring pin (m3x12mm) is compatible with several nailers and staplers. The metal component assists with fastening the magazine toggle, and is sold individually. Pliers and a wrench set may be helpful in making the replacement.
$8.49
In Stock
O-RING-3.323X.122
Part #MRG084431
This replacement O-ring is designed to create a tight, reliable seal between the cylinder ring and the body of your pneumatic nailer. It helps maintain proper air pressure and tool performance by preventing air leaks in this critical area. If your nailer is losing power or not operating as smoothly as it should, a worn or damaged O-ring c...Read moreould be the cause. This part is sold individually and is easy to install during routine maintenance or repair. Replacing a worn O-ring can help restore your tool’s efficiency and extend its working life.
Read less
$33.24
In Stock
O-RING-2.236X.115
Part #851438
Help keep your pneumatic nailer or stapler operating efficiently with this O-ring seal, designed to create an airtight seal between internal components and maintain the air pressure needed for consistent performance. A worn or damaged O-ring can lead to air leaks, reduced driving power, and inconsistent operation, making replacement an im...Read moreportant part of routine maintenance. Replacing the seal can help restore proper airflow, improve tool performance, and extend the life of your equipment. Because O-ring locations can vary between models, refer to your tool's parts diagram or service manual to confirm the correct placement before installation. Sold individually.
Read less
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More