This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 3 hrs and your part ships today!
This is a genuine replacement light bulb for a refrigerator. The inside of your refrigerator should illuminate when you open the door. If your fridge does not illuminate, you may need to replace this ...
$79.64
In Stock
Order within the next 3 hrs and your part ships today!
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$28.95
In Stock
Order within the next 3 hrs and your part ships today!
This temperature sensor is for refrigerators.
The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control.
Unplug the refrigerator and s...
$58.30
In Stock
Order within the next 3 hrs and your part ships today!
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
$47.08
In Stock
Order within the next 3 hrs and your part ships today!
The compressor run capacitor keeps the refrigerator motor running smoothly. Be sure to unplug the appliance before installation and verify the part number for compatibility.
$92.56
In Stock
Order within the next 3 hrs and your part ships today!
Need more room in your freezer? This shallow wire shelf gives you extra space to organize frozen foods and makes it easier to find what you need. It’s sturdy, coated to resist wear, and helps cold air...
$90.15
In Stock
Order within the next 3 hrs and your part ships today!
Is your refrigerator not cooling like it used to? The Whirlpool Refrigerator Temperature Sensor might just be what you need! This is a dependable thermistor, which plays an important role in maintaini...
$85.20
In Stock
Order within the next 3 hrs and your part ships today!
We understand the frustration of a broken fridge shelf; your food gets disorganized, and the cool air isn't distributed evenly. Here to solve your problem is the Whirlpool Wire Shelf, a high-quality, ...
$168.49
In Stock
Order within the next 3 hrs and your part ships today!
Keep your Whirlpool freezer running at peak performance with this genuine OEM Evaporator. This key part is instrumental in maintaining the perfect chilling temperature within your freezer. What's it...
$161.49
In Stock
Order within the next 3 hrs and your part ships today!
Questions And Answers for MZF34X16DW04
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Unplug the fridge then wheel the refrigerator out to where you can get to the back - you will probably have to disconnect the ice maker water hose. Using the nut driver remove all the screws from the lower panel on the fridge. You will not have to remove the water hose connection just move the panel around a little. Look on the left side (facing the back of the fridge) you will see the capacitor held onto the compressor with a spring clip. Just pull the clip toward you and that will free the capacitor. Pull up on the capacitor and that will unplug it from the compressor. Be careful not to touch the two poles on the old capacitor. Capacitors store electricity and it could give you a jolt. I used electrical tape to insulate the poles and then threw it away. Plug in the new capacitor- re-hook the clip, reinstall the back panel, plug it in and verify that the fridge is working. Hook your water hose back up and move it back into place and you are done.
