MWM6600TW Haier Range - Overview

Diagrams for MWM6600TW

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
TRAY - GLASS – Part Number: MW-7600-22
No Longer Available
TRAY - GLASS
Part #MW-7600-22
Motor Tray – Part Number: WB26X10252
No Longer Available
Motor Tray
Part #WB26X10252
MICRO SWITCH(STAND ON) – Part Number: WB24X10146
No Longer Available
MICRO SWITCH(STAND ON)
Part #WB24X10146
This small but important switch keeps your microwave safe by making sure it won’t run when the door is open. If your microwave isn’t starting or seems unsafe, this part might be the fix. It’s easy to replace—just unplug the appliance first to stay safe, then install the new switch to get things working properly again.
RING – Part Number: MW-5800-25
$15.35
Special Order
RING
Part #MW-5800-25
CAPACITOR - H.V. – Part Number: MW-1400-14
$41.69
Special Order
CAPACITOR - H.V.
Part #MW-1400-14
COUPLER – Part Number: MW-1940-01
$10.73
Special Order
COUPLER
Part #MW-1940-01
DIODE - H.V. – Part Number: MW-2200-17
$20.07
Special Order
DIODE - H.V.
Part #MW-2200-17
MAGNETRON – Part Number: MW-4450-20
$132.11
Special Order
MAGNETRON
Part #MW-4450-20
MOTOR - FAN – Part Number: MW-4550-28
$47.80
Special Order
MOTOR - FAN
Part #MW-4550-28
P.C.B. - Assembly – Part Number: MW-5210-09
$143.39
Special Order
P.C.B. - Assembly
Part #MW-5210-09
SWITCH - MICRO INTER – Part Number: MW-7100-34
$24.34
Special Order
SWITCH - MICRO INTER
Part #MW-7100-34
SWITCH - CIRCUIT – Part Number: MW-7100-35
$24.34
Special Order
SWITCH - CIRCUIT
Part #MW-7100-35

Exact Part matches for your search term

MWM6600TW:0.6 CU.FT./700WATT T – Part Number: MWM6600TW
No Longer Available
MWM6600TW:0.6 CU.FT./700WATT T
This part number matches the current model number MWM6600TW
Part #MWM6600TW
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
the cover for the tray motor was attached to the bottom cover at 6 points. they were 3mm to 4mm long.
1 of 3 people found this instruction helpful.
  • James A from SILVERDALE, WA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I used small wire cutter I use in fly tying hobby. The metal was easy to cut. When cover was removed I unplugged the motor,removed it and plugged the new one in.
To replace the cover -- reverse it,place the 2 tabs on one edge into the slots that are already part of the base. On the opposite edge there is a domed shaped tab with a h ole in center. Place the small screw that was provided back in and thighten.
Your Done
Was this helpful?
Thank you for voting!