MWM6600RW Haier Range - Overview
Sections of the MWM6600RW
[Viewing 1 of 1]
Exact Part matches for your search term
[Viewing 1 of 1]
MWM6600RW:0.6 CU.FT./600 WATT
This part number matches the current model number MWM6600RW
PartSelect #: PS17240910
Manufacturer #: MWM6600RW
No Longer Available
Keep searches simple, eg. "belt" or "pump".
MICRO SWITCH(STAND ON)
PartSelect #: PS1019163
Manufacturer #: WB24X10146
This small but important switch keeps your microwave safe by making sure it won’t run when the door is open. If your microwave isn’t starting or seems unsafe, this part might be the fix. It’s easy to ...
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the cover for the tray motor was attached to the bottom cover at 6 points. they were 3mm to 4mm long.
I used small wire cutter I use in fly tying hobby. The metal was easy to cut. When cover was removed I unplugged the motor,removed it and plugged the new one in.
To replace the cover -- reverse it,place the 2 tabs on one edge into the slots that are already part of the base. On the opposite edge there is a domed shaped tab with a hole in center. Place the small screw that was provided back in and thighten.
Your Done
To replace the cover -- reverse it,place the 2 tabs on one edge into the slots that are already part of the base. On the opposite edge there is a domed shaped tab with a hole in center. Place the small screw that was provided back in and thighten.
Your Done
Parts Used:
-
James A from SILVERDALE, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!