MWD366 Caloric Microwave - Overview

Diagrams for MWD366

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8206232A
$10.49
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(92)
Part #8206232A
This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and should be replaced. The bulb attaches directly to an appropriate light socket and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwave using a Phillips screwdriver. If your exterior light bulb has not been changed before, it is probably held in place with some silicone. You will need to cut away this silicone to remove the old bulb. If you cannot access the silicone with a utility knife, it can be removed using dental floss. Once the silicone is removed, simply unscrew the old bulb, and replace it with the new one. Be sure to disconnect the power to the microwave before you begin this repair. This light bulb measures about 1 1/8 inches. We do not recommend using a higher-wattage bulb for this appliance, and can only recommend this specific bulb. If fixing the bulb does not solve your microwave light issue, it's possibly a problem with the socket, which means the socket and/or board will need to be replaced. This can be a more dangerous repair, so consult your user manual or a technician before attempting.
Metal Rack Support Clip – Part Number: B8371001
No Longer Available
Metal Rack Support Clip
Part #B8371001
Sold Individually.
Grease Filter – Part Number: R0710162
No Longer Available
Grease Filter
Part #R0710162
This metallic grease/air filter collects grease particles in the air from cooking. This filter is also removable for cleaning.
Capacitor – Part Number: 59001160
No Longer Available
Capacitor
Part #59001160
Rectifier – Part Number: WP13091701
$41.32
Special Order
Rectifier
Part #WP13091701
This part is also known as a rectifier.
DISCONTINUED – Part Number: R0713637
No Longer Available
DISCONTINUED
Part #R0713637
CASE SHIELD – Part Number: 53451
No Longer Available
CASE SHIELD
Part #53451
TOP TRIM, CONTROL PANEL – Part Number: 53453
No Longer Available
GRILLE – Part Number: 53455
No Longer Available
GRILLE
Part #53455
DISCONTINUED – Part Number: 53466
No Longer Available
DISCONTINUED
Part #53466
DISCONTINUED – Part Number: Y0087235
No Longer Available
DISCONTINUED
Part #Y0087235
DISCONTINUED – Part Number: Y0053401
No Longer Available
DISCONTINUED
Part #Y0053401

Common Symptoms of the MWD366

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
light bult needed to be replaced
222 of 329 people found this instruction helpful.
  • Deborah from Millersville, MD
  • Difficult
  • Less than 15 mins
  • Screw drivers
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li ght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Was this helpful?
Thank you for voting!
Bulb "burnt out"
98 of 165 people found this instruction helpful.
  • Joseph from Pembroke, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
Was this helpful?
Thank you for voting!
burned out bulb
28 of 39 people found this instruction helpful.
  • john from plainfield, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again.
Was this helpful?
Thank you for voting!