This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
Ask our experts a question about this model and we'll get back to you as soon as possible!
39 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat
August 16, 2021
Exactly when does lid lock kick on, just when spinning.
For model number MVWC565FW2
Hi Pat,
Thank you for your question. The door lock assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open. When the washer is on and the lid is closed the lock is engaged. If the washer is not starting, agitating, spinning or draining when the lid is closed, then the issue is likely the door lock assembly and it will need to be replaced. We hope this helps! If you have any questions, please let us know.
I can't seem to get the agitator out of my washer to see what is wrong with it why it will not agitate it was recently overloaded
For model number MVWC565FW2
Hello Barbara, thank you for contacting us. You can follow these instructions to remove the agitator. You will have to remove the fabric softener dispenser first. Then use a long ratchet with a 7/16th socket to loosen the nut inside the agitator. Then push the agitator a little in order to remove it. The problem is most likely linked to the washer's faulty drive hub. You may need to replace the drive hub, part number PS6012095. We hope this helps.
Sensing light comes on starts filling with water then stops. Then would not drain. My husband put the washer on hand wash and it drained out the water. What part do I need
For model number MVWC565FW2
Hello Sandra, thank you for contacting us. Based on our research, the issue is most probably with the electronic control board, part number PS12731238. You may need to check the electronic control board to fix the issue. We hope this solves your problem!
Excessive lint on clothes. Is there a lint filter on this clothes washer.
For model number MVWC565FW2
Hi Patrick,
Thank you for your question. If there is lint on your clothes after a wash, the drain pump filter may be clogged and you will need to clean it. This filter is located in the bottom of the outer tub assembly under the basket. To access it, you need to remove the basket and the agitator. Once you have found it, unthread the screws securing it, so you can remove it. If you have overloaded your washer, this would be another reason why lint would build up on your clothes. Wash the clothes in smaller loads. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Do I need a new capacitor if my agitator doesn't work but the spin cycle does
For model number MVWC565FW2
Hello Abe, thank you for contacting us. If your agitator is not working, you need to check if the agitator assembly, part number PS16620354, is damaged. Check the drive blocks, they are usually made of plastic and can wear out over time. If the drive belt is broken or loose, the agitator will also not work. We hope this helps.
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.